Low Halogen Flame Retardant Cable Suitable for Systems With Fire Safety

Product Description:

low halogen flame retardant cable suitable for systems with fire safety requirements laid

Product Specification:

1.A finished cable burning test results meet the requirements of GB 12666.5 not less than the Class B requirements.

2, LSZH cable burn the finished corrosion test, measurement and control combustion gases through indirect aqueous PH and conductivity to determine the results PH value should not be less than 4.3, the conductivity should not exceed 10us/min.

Characteristics:

3, low smoke low halogen cables should be measured and HCL HCL emission emission should not exceed 100mg / g.

4, cable burning smoke density test, the test results should not be less than its minimum transmittance of 60%.

FAQ:

 Installation laying temperature not lower than -15 ℃ 

allowed minimum bending radius: Interior of not less than five times the cable diameter

Outside of not less than 10 times the cable diameter

Products in accordance with the appropriate standards of production（GB/T1486-93;GB/T11138-97;JISAnd the U.S. military standard），Attenuation, interference is strong, structural asked Tung electrical performance is good, with good resistance to gas properties.

Picture: