ISO2531 Socket Spigot Ductile Iron Pipe K8

Product Description:

 

General Introduction and Specifications of ISO2531 Socket Spigot Ductile Iron Pipe K8

Standard: Pipes according to ISO2531/EN545

Joint: T Type joint

Size: DN80-DN2000

Effective length: 6m/pc or 5.7m/pc or 5.5m/pc

Internal lining: cement mortar lining comply with ISO4179

External coating: sprayed metallic Zinc coating (min.130g/m2) according to ISO8179 + bitumen painting (min.70μm) according to BS3416.

Gasket: Matched 100% natural rubber gasket in accordance with ISO4633.

 

Applications of ISO2531 Socket Spigot Ductile Iron Pipe K8

Design Flexibility: Pipes will safely function over a wide range of operating pressure, trench loads and installation conditions. Standard design includes generous factor of safety to protect against unknowns.

Easier Handing: Ductile Iron Pipes can be more easily maneuvered under and around existing underground obstructions, thereby eliminating unnecessary changes in line or grade.

Superior Joints: Easily assembled push in joints speed job progress, minimize installation cost. Joint remains leakproof under all operating pressures.

A complete Range: Ductile Iron Pipes are available with complete range of fittings and accessories in size from 80 to 2000mm dia. And a variety of lining and coatings for varied service conditions.

 

Standard Wall Thickness of ISO2531 Socket Spigot Ductile Iron Pipe K8

Nominal Wall Thickness of pipe:

e=K(0.5+0.001*DN)

Where, DN: Nominal diameter; K: Coefficient(K=7,8,9,10,11,12...)

Nominal Wall Thickness of pipe fittings:

e=7+0.014*DN (K=14)

e=6+0.012*DN (K=12)

Packing, Delivery and transport of ISO2531 Socket Spigot Ductile Iron Pipe K8

 

Show for ISO2531 Socket Spigot Ductile Iron Pipes K8