Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1 m.t.
Supply Capability:4000 m.t./month
High temperature resistive, irradiation cross-linkable, flame retardant POE compound
1. Type and application
Type | Product | Application and Cable Specification |
FJZ1125H | 125℃Irradiation cross-linkable, flame retardant POE compound | Used for cross-linked wires of apparatus and instruments, electric motor and etc. Pass UL3271 standard. Meeting RoHs standard |
FJZ2125H | 125℃Irradiation cross-linkable, flame retardant POE compound | Used for cross-linked wires of apparatus and instruments, lamps and lanterns and etc. Meeting RoHs standard |
FJZ1135H | 135℃Irradiation cross-linkable, flame retardant POE compound | Used for cross-linked and insulating wires and cables of apparatus and instruments, equipments and etc. Meeting RoHs standard |
FJZ1150H | 150℃Irradiation cross-linkable, flame retardant POE compound | Same above, and pass the 38 grade standard of UL1581. Meeting RoHs standard |
2. Product description
Irradiation cross-linkable POE compound, based on POE resin, is produced and pelletized by special technology with adding special stabilizing agent, modifier, flame retardant, cross-linking agent and other special additives.
3. Processing
The compound can be processed with conventional extruders, and the screw with a minimum 20:1 L/D and low compression ratio die is recommended. Low tensile ratio is needed.
following temperature(℃) profile of extruder is recommended:
Zone | Zone 1 | Zone 2 | Zone 3 | Zone 4 | Head | Die |
temperature ℃ | 140 | 145 | 150 | 155 | 150 | 150 |
4. Storage and transport
Packaging：25kg/bag， PE membrane inside bag and Kraft outside bag.
Storage and transport: Avoiding in direct sunlight and weathering. The storage place should be in clean, cool, dry, and ventilated conditions.
5. irradiated dosage
The normal irradiated dosage（recommended） of irradiation cross-linked and flame retardant POE compound is 15 megarad.
6. Properties
Table
Item | Unit | FJZ1125H | FJZ2125H | FJZ1135H | FJZ1150H | ||||
Standard | Typical | Standard | Typical | Standard | Typical | Standard | Typical | ||
Density | g/cm3 | -- | 1.34 | -- | 1.30 | -- | 1.33 | -- | 1.32 |
Hardness | ShoreＡ | -- | 91 | -- | 95 | -- | 92 | -- | 92 |
Tensile Strength | ≥ MPa | 12.5 | 14.0 | 12.5 | 16.0 | 12.5 | 15.0 | 13.8 | 16.0 |
Elongation at Break | ≥ % | 200 | 350 | 200 | 360 | 200 | 380 | 300 | 400 |
Impact Brittleness Temperature | ≤ ℃ | -25 | Pass | -25 | Pass | -25 | Pass | -25 | Pass |
Volume Resistivity, at 20℃ | ≥Ω﹒m | 1.0×1012 | 2.0×1013 | 1.0×1012 | 3.0×1013 | 1.0×1012 | 2.0×1013 | 1.0×1012 | 3.0×1013 |
Dielectric Strength | ≥MV/m | 20 | 24 | 20 | 25 | 25 | 25 | 25 | 25 |
Oxygen Index | ≥ | 30 | 30 | 27 | 28 | 27 | 27 | 27 | 27 |
Thermal Prolongation |
|
|
|
|
|
|
|
|
|
Elongation Under Load | ≤ % | 100 | 20 | 100 | 25 | 100 | 25 | 100 | 25 |
Permanent Elongation after cooling | ≤ % | 10 | 0 | 10 | 5 | 10 | 5 | 10 | 0 |
Thermal Aging |
|
|
|
|
|
|
|
|
|
Aging Temperature | ℃ | 158±2 | 158±2 | 158±2 | 158±2 | 165±2 | 165±2 | 180±2 | 180±2 |
Aging Time | h | 168 | 168 | 168 | 168 | 168 | 168 | 168 | 168 |
Variation on Tensile Strength | ≥ % | 80 | 103 | 80 | 102 | 80 | 107 | 80 | 110 |
Variation on Elongation at Break | ≥ % | 80 | 98 | 80 | 97 | 80 | 90 | 80 | 86 |
The above data are all the properties of compound after cross-linked.
7. Company
