Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1000 set
Supply Capability:20000 set/month
Material
Stiles: Timber running full length of the door
Rails: Timber
Cross banding: High density MDF 6mm/ Plywood
Core: 33mm medium density hollow core, Solid Core or Timber (Depends on order and client requirement)
Finished edges: solid lumber to match face veneers, “T” edge, bonded to stile and cross band.
Face veneers: Standard grade is AA, As per selected skin designs.
Common Veneer Species
Choosing a veneer species for your project is an important decision in the design process. While there are many different species to choose from, Beech, Mahogany, Sapelli, Maple, Walnut, Cherry, White Oak, Red Oak are major choices in many commercial Building & Residential Projects. Its Important to keep in mind that veneer is a natural material and its individuality is a characteristic that makes each piece unique. Nature produces many individual shapes and colors even with in the same tree.
Construction:
Bonded core: Stiles, rails and cross bands are bonded to the core using a hot press. Matchinghardwood edges are then installed prior to face veneering.
Calibration: The door blank is then sanded to achieve uniform thickness.Face veneers are manufactured from carefully selected. Face veneers are applied to the door blanks in a second pressing stage.
Finish sanding: 100 & 220 grit, ready for finishing.
Factory Finishing: Standard finish is catalyzed lacquer Custom stains and topcoats are spray applied and cured in a heated air convection oven.
