Hydraulic Door Closer /Floor Spring/Floor Hinge for Glass Door FS-71

Product Description:

INTRODUCTION

Floor Spring is used for glass door, and they can be used together with door clamp. Floor Spring can be opened with double sizes, and on this point, it is different from that of door closer, which can just be opened by one size.  The key of technique lies on the loading seat under the main bearing, which decides the level of loading on the floor spring. Usually it can be opened from 300thousand or 1million times

FEATURES

u  Applicable for glass doors, wooden doors and the glass doors of metal frame and wooden frame.

u  Floor spring comply to EN 1154 and GB standard , and fire-rated EN1634 standard.

u  Maximum 500000 cycles tested without damage or maximum 7 years guarantee.

u  Double ways opening with smoothly movement, hold-open at 90°.

u  Closing speed and latching speed adjustable, latching point accurately at 0°

u  Stainless steel cover plate, satin or mirror surface available.

u  High quality casting iron floor spring body with 2 layers anti-rust coating.

u  All spindle types available for different countries.

u  Germany hydraulic machine oil and sealed rings, keep perfect working in cold temperature.

 SPECIFICATION

INSTALLATION STEPS

1.      Draw lines and make floor spring pivot center and door-nip pivot coincide with each other.

2.      Drill holes on the floor according to the instructions. The sizes of the holes must tightly match the floor spring.

3.      Place the floor spring into the holes and position it.

4.      Raise the door leaf installed with door-nip, and insert the floor spring pivot into the hole of the door leaf.

5.     Adjust the screws at three directions. Make them vertical and the upper and lower pivot center coincide with each other.

6.      Adjust the speed of door closing.

7.      Put the decoration cover on the floor spring.