Loading Port:Tianjin
Payment Terms:TT OR LC
Min Order Qty:1000 m²
Supply Capability:10000 m²/month
| Type: | XPS Boards | Place of Origin: | Brand Name: | ||
| Model Number: | XPS.S-JSB | compressive strength: | min.300Kpa | thermal conductivity: | 0.029-0.036W/M.K |
| material: | xps/eps, synthetic mortar | XPS color: | pink, blue, green |
| Packaging Detail: | 6mm: 20pcs/carton 10-20mm: 10pcs/carton 30-80mm:5pcs/carton |
| Delivery Detail: | WITHIN 25 DAYS AFTER RECEIPT OF THE DEPOSIT |
1.cement&glass+XPS+cement&glass mesh
2.size:1200-2500 L*600-1200 W *6-80mm T
3.CE approved
4.waterproof
5.light,easy install
Insulated Fiberglass tile backer boards are made from extruded polystyrene and finished both sides with a synthetic mortar reinforced with a glass fibre mesh. It is ideal for wet-zone and damp zone in a bathroom, washroom and shower area.
Characteristics:
1. Moisture and rot proof
It is ideal for bathrooms, showers and wetrooms, suitable for exteiror use.
2.Exceptional Stability
Eliminates the common cause of tile failure associated with mdf, chipboard, plywood, plaster and plasterboard.
3.High thermal insulation
Helps reduce heat loss. Recommended and suitable for use with all types of electrical underfloor heating.
4.Light weight and workable
Easier and faster to work with than all other type of building board.
5. Replace wet finishes
Can be used in place of floor screeds and rendered/plastered all finishes. Fast-tracks tiling and save costs.
Boards open up a whole new range partitions of any shape and design in minutes. This eliminates expensive labour costs and provides the ultimated substrate ready for both tile fixing or render finishes. It is easy for a person to do single handed as the boards are lightweight and very easy to cut with a saw or knife. Shield Waterproof Insulation board makes it easy to create a fully waterproof wetroom, covering the walls, floors and shower area.
XPS.S-JSB Sizes
Item No. | Length (mm) | Width (mm) | Thickness (mm) | Weight per sheet (kg) |
XET-J01 | 1200 | 600 | 6 | 2.0 |
XET-J02 | 1200 | 600 | 10 | 2.2 |
XET-J03 | 1200 | 600 | 12 | 2.3 |
XET-J04 | 1200 | 600 | 20 | 2.5 |
XET-J05 | 1200 | 600 | 30 | 2.7 |
XET-J06 | 1200 | 600 | 40 | 3.0 |
XET-J07 | 1200 | 600 | 50 | 3.3 |
XET-J08 | 1200 | 600 | 60 | 3.6 |
XET-J09 | 2500 | 600 | 10 | 4.6 |
XET-J10 | 2500 | 600 | 12 | 4.8 |
XET-J11 | 2500 | 600 | 20 | 5.2 |
XET-J12 | 2500 | 600 | 30 | 5.6 |
XET-J13 | 2500 | 600 | 40 | 6.3 |
XET-J14 | 2500 | 600 | 50 | 6.9 |
XET-J15 | 2500 | 600 | 60 | 7.5 |
We also can provide customized dimensions on request.
XPS.S-JSB Technical Data
Thermal conductivity, 90 days, 10°C | GB/T10294 (EN13164) | 0.030-0.036W/(M.K) |
Compressive strength at deformation of 10% | GB/T8813 (EN826) | Minimum of 300Kpa |
Bond Strength | N/A | 0.3N/mm2 |
Maximum tile loading weight | N/A | 60kg/M2 |
Bending Stiffness (20mm) | ASTM C203 | 2.00Mpa |
Moisture permeability | GB/T2406 (DIN EN 12086) | 3.2m |
Dimensional Stability | N/A | ≤1.0 |
Working temperature | N/A | -50°C-80°C |
Other Data of XPS.S-JSB
Insulation Board Thickness (mm) | XPS thickness (mm) | R-value (m.k/w) | Heat transmission coefficient at 10°C (W/ M2XK) | Heat transmission coefficient at 10°C (W/ M2XK) |
6 | 5 | 0.16 | 3.19 | 3.54 |
10 | 9 | 0.28 | 2.33 | 2.52 |
12 | 11 | 0.36 | 2.69 | 2.06 |
20 | 19 | 0.59 | 1.40 | 1.46 |
30 | 29 | 0.91 | 0.99 | 1.03 |
40 | 39 | 1.22 | 0.75 | 0.80 |
50 | 49 | 1.53 | 0.62 | 0.65 |
60 | 59 | 1.84 | 0.53 | 0.54 |
80 | 79 | 2.93 | 0.48 | 0.36 |
