Loading Port:Tianjin
Payment Terms:TT OR LC
Min Order Qty:1 set
Supply Capability:1000 set/month
Horizontal Pond water pump submersible pump
1.Technical Data :
Flow range | 10~500 m3/h |
Lift range | 10~600m |
Applicable well Borehole diameter | φ175~φ400mm |
Diameter scope | φ32~φ203mm |
Temperature range | -15~80 °C |
2. Horizontal Pond water pump submersible pump:
agriculture irrigation, sprinkler irrigation well water lifting |
water supply, drain system of industrial and civil building |
the hill, mountain areas' water diversion |
drainage of low-lying areas |
water supply, drainage of industrial and mining enterprises in urban and rural area |
all the other water facilities |
3.Characteristics
(1). Motors and pumps assembled into one.
(2). Simple structure.
(3). Easy installation and removal, small area.
(4). Simple using and maintenance.
(5) non-clogging, no leakage,high quality.
(6). reliable continuous running.
(7). low noise , long life , small volume , light weight.
(8) Safe and reliable operation, no pollution to water, etc.
4. Horizontal Pond water pump submersible pump
(1). 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%.
(2). Motor cavity must be filled with water.
(3). The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level.
(4). The distance from the motor bottom to well bottom must be more than 3m.
(5). Water temperature should be no more than 20 centidegree.
(6). Sand content of the water ( by mass) should be no more than 0.01%.
(7). PH value of water 6.5~8.5.
(8). Hydrogen sulfide content of the water should be no more than 1.5mg/L.
(9). Chloride ion content of the water should be no more than 400mg/L.
(10). Water yield of water source should ensure the requirements of pump continuous working.
