Horizontal Multistage Centrifugal Pump D Series

Product Description:

Introduction of D Series Horizontal Multistage Pump

This series of pumps use national energy-saving hydraulic model, developed and updated constantly by our factory, with the advantage of high efficiency, wide range of performance, safety and smooth operation, low noise, easy installation and maintenance, long life, and its technology level is in the domestic leading position, product performance is reliable. 

Performance of D Series Horizontal Multistage Pump

Flow Range:3.7-840m3/h

Head Range:19-680m

Power Range:3-630KW

Temperature:-20ºC-105ºC

Material:Cast Iron,Stainless Steel

Work Pressure:≤1.6MPa

Features of D Series Horizontal Multistage Pump
1. This series pump is a horizontal, single suction, multi stage centrifugal pump section, the suction is in horizontal direction, and outlet is vertical upward. Water suction, middle, discharge section, bearing housing and pump body are bolted into one strain, and select stages according to the pump head. 
2. Rotor includes shaft, impeller, shaft sleeve, balance disk, and other parts. Axis parts are connected through the flat keys and the shaft nuts. The rotor is supported by the rotor bearings or sliding bearings in both ends, the bearing does not bear axial force, axial force is balanced by the balance disc. Bearings lubricated with grease, sliding bearings lubricated with light oil, and oil ring lubrication, and cooled by circulating water. 
3. Shaft seal in the form of two kinds, mechanical seals and packing seal. When use packing seal, the packing ring should be placed at the right location, the tightness of packing must be appropriate to the liquid oozing drop by drop. Various sealing elements is in a sealed chamber, the chamber must be filled with some water, as water seal, water cooled or water lubrication. At the seal there is replacable sleeve, to protect the shaft. 
4. From the motor direction, the pump is clockwise rotation.