Loading Port:Tianjin
Payment Terms:TT or L/C
Min Order Qty:50MT m.t.
Supply Capability:based on order m.t./month
Hollow Section-Square Tubes
Application:
It is widely used in building, machine, chemical equipment, automobile industrial, container, it is also applied to agriculture and mine machine.
Standard：
ASTM A500, GB6728
Steel grade:
ASTM A500: A, B, C
GB6728：Q195，Q215，Q235，Q345
Size of Pipe:
*Remark: Besides below sizes, we also can arrange production based on requirement of customers
SIZE(mm) | THICKNESS(mm) |
10×10 | 0.6-1.0 |
12×12 | 0.6-1.0 |
16×16 | 0.6-1.2 |
19×19 | 0.6-1.5 |
20×20 | 1.6-1.5 |
25×25 | 1.0-2.75 |
30×30 | 1.0-2.75 |
32×32 | 1.0-3.0 |
38×38 | 1.0-3.0 |
40×40 | 1.0-3.5 |
50×50 | 1.0-5.0 |
60×60 | 1.0-6.0 |
63.5×63.5 | 1.0-6.0 |
70×70 | 1.5-6.0 |
75×75 | 1.5-6.0 |
80×80 | 2.0-6.0 |
90×90 | 2.0-6.0 |
100×100 | 2.3-6.0 |
120×120 | 4.0-6.0 |
125×125 | 4.0-6.0 |
150×150 | 4.0-8.0 |
200×200 | 6.0-12 |
250×250 | 6.0-12 |
300×300 | 6.0-12 |
400×400 | 6.0-12 |
Standard: ASTM A500
Chemical Composition(%)
Chemical Requirement | ||||
| Composition % | |||
Grade A | Grade B | |||
Heat | Product | Heat | Product | |
Element | analysis | analysis | analysis | analysis |
Carbon max | 0.26 | 0.3 | 0.22 | 0.26 |
Manganese max | … | … | 1.4 | 1.45 |
Phosphorus, max | 0.035 | 0.045 | 0.03 | 0.04 |
Sulfur max | 0.035 | 0.045 | 0.02 | 0.03 |
Where an ellipsis (...)appears in this table, there is no requirement | ||||
For each reduction of 0.01 percentage point below the specified maximum for carton, and increase of 0.06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50% by heat analysis and 1.6% by product analysis | ||||
Mechanical Properties
Tensile Requirement | ||
| Grade A | Grade B |
Tensile strength, min, psi (Mpa) | 48000 (400) | 70000 (483) |
Yield strength, min, psi (Mpa) | 36000 (250) | 50000 (345) |
Elongation in 2 in. (50.8mm), min, % | 23 | 23 |
GB6728：
Steel Grade |
CHEMICAL COMPOSITION |
MECHANICAL PROPERTIES | ||||||
|
C (%) |
Si (%) |
Mn
(%) |
P(%)
Max |
S (%)
Max |
YS(Mpa)
Min |
TS(Mpa)
Min |
El (%)
Min |
Q195 |
0.06-0.012 |
0.3 |
0.25-0.5 |
0.45 |
0.5 |
195 |
315 |
22 |
Q215 |
0.09-0.15 |
0.3 |
0.25-0.55 |
0.45 |
0.5 |
215 |
335 |
22 |
Q235 |
0.12-0.22 |
0.3 |
0.3-0.7 |
0.45 |
0.45 |
235 |
375 |
20 |
Q345 |
0.20 |
0.55 |
1.0-1.6 |
0.45 |
0.45 |
345 |
510 |
21 |
Square Welded Hollo Sectio/Welded Rectangle Hollow Section
