High Speed Slitting and Cut to Length Line

Product Description:

‍Specifications of Leveling and Cut to Length Line

General Information of Leveling and Cut to Length Line

Cut to length line is used to cut metal with thickness range:0.3mm -40mm,width range: 300mm-2500mm steel coil to required length, change steel coil to steel

sheet. This line is suitable for leveling aluminium and carbon steel coils.

Processing flow is as following:

carry coil→load coil→de-coiling（pressing guide +opener）→entry、rough level→guiding→leveling→cutting(with coding reader to set fixing length for

cutting) →belt transmission desk→discharging

Technical Data of Leveling and Cut to Length Line

Manual Sheet Metal Shearing Machine Equipment Brief Introduction:

Cut to length line equipment, is used for cold rolled steel, galvanized steel, and hot rolled steel(Should clean the equipment after operation, preventing oxidized

substance sticking on the rolls), going through precision NC Feeder to the shear machine,and cut the steel length you want.

Manual Sheet Metal Shearing Machine Compose:

Coil Car→ Uncoiler→ Leveler→ Loop Control→ Parallelism bar → NC Feeder→Conveyer→Stacker→ Hydraulic Shear Machine

Come with: Hydraulic System, Pneumatic System, Lubrication System, Electronic System

1.Coil Car

We offer durable coil cars which are applicable in various industries for lifting coils .

2.Uncoiler

Holding the coil and uncoiling the coil, composed of four segments.

1)One sector cantilever with hydraulic expansion mandrel system.

2)Mandrel expansion range: Φ470-Φ530mm.

3)Pneumatic butterfly brake

4)Covered with Polyurethane to start uncoiling the strip, manually operation

5)The mandrel uncoiler base frame is made from ark-welded steel

3.Leveler

1)To Flatten the strip at processing speed

2)Mechanical Features

3)Pinch Rolls

4)Work Rolls

4.Loop Control

Using inductor to control the loop, make a good speed balance between leveler and NC Feeder 

5.Centring Device

Using vertical roll on both sides to centre the strip Manual adjustment Centering Range

6.NC Feeder

ACS11KW Servo motor control, feeding the precise strip with high speed.

Touch Screen for user-friendly use.

Pinch Roll: 2pcs (42crMo, alloyed steel, surface heat treatment,chrome plated)

Control System: HMC+PLC Controller

7.Conveyer

Conveyer Construction: Combined by welded steel plate and steel.

8.Stacker

Stacker Structure: Use the steel and steel plate welding processing. make sure both sides of the pusher plate with a tailgate, let the pallet tidy.

9.Hydraulic Cut To Length Machine

1)Hydraulic Driven

2)Closely work together with NC Feeder

3)Gearing: Gear wheel driven the machine,

4)Cutter: Material SKD-11, HRC59o-61o, four sides of the cutter are all sharp for maximum economical usage.

10.Hydraulic System

A hydraulic cylinder, controlled by an electromagnetic commutation valve

11.Pneumatic System

The measurements of the cylinders correspond to ISO standards

12.Lubrication System

All the equipments have related lubrication system

13.Electronic System

1)Including main control table and secondary control table

2)Main components are from Japan Mitsubishi, Fuji... or the same level products

Packaging & Delivery of Leveling and Cut to Length Line

‍