Wurth Packaging Tape - High Quality Fiberglass Tape FGT-180

Product Description:

Specifications Of High Quality Fiberglass FGT-180:

1. Filament / fiberglass tape FGT-180 is with PET film and one-directional fiberglass.

2. The tape is with high tensile strength, used for palletizing, holding, bundling, reinforcing, heavy duty packing, carton packing & sealing.

3. Standard cut roll packing: one roll per plastic bag, then into cartons. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.

CONSTRUCTION Of High Quality fiberglass tape FGT-180:

Backing: One directional Fiberglass + PET film

Adhesive: Hot melt rubber based adhesive

TYPICAL PHYSICAL PROPERTIES Of High Quality fiberglass tape FGT-180:

Total Thickness (adhesives + backing): 140micron

Initial Tack: more than 18# steel ball

Tensile Strength: more than 180N/25mm

Peel Adhesion: 13 N/25mm

Holding power: not less than 30h (1kg/25mm)

Temperature resistance: 60C

Elongation: 0.3%

Sizes:

Jumbo Roll: 1.02 x 1000m

Cut Roll: As per customer's requirements

Packaging Of High Quality fiberglass tape FGT-180:

Each Fiberglass Mesh Roll is put into Shrink Bag, and then put into Carton or Pallet. (24 rolls or 48 rolls per carton)

Remarks Of  High Quality fiberglass tape FGT-180:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.