Loading Port:Huang Pu
Payment Terms:L/C,T/T
Min Order Qty:1 Pcs pc
Supply Capability:1500 Pcs per Month pc/month
Housing:12" Die-casting grey powder coated aluminum T=50-55um
Adhesion of ISO class 1/ASTM class 4B
Front cover:Stainless steel(SUS 304#,316# optional)
Bracket: Powder coated aluminum
Lens: All-in-one optical lens, efficiency≥85%
Cable gland:IP68 PG-9PVC
Gasket:Tooling shaped seal
Power cable: H05RN-F 3x0.75mm2 L=2m
Spike: PVC
Mounting base: Powder coated die-casting aluminum
Waterproof: IP67
Voltage: DC24V
Watts: COB 1x5W
Color: Single Color LEDs, w/base
Matrial: Aluminium alloy
Beam Angle: 40/50degrees
Packing: 8PCS/CTN, 5.5KG, Size: 26x25x39CM.
Life Time: 50000hours
CE Certificate, it can be used in the Park, Garden, and some other comercial places, outdoor, IP65, 2years warranty
Attention:
For your own safety, please read this manual before installingthe device.
This manual covers the important information on installation and applications.
Please install and operate the fixture with following instructions.
1. LED lamp bead arrangement, in strict accordance with the optical distribution. (when mixed color spot clean)
2.Advanced machine to weld lamp bead
3.Silent SUNON fan with good heat dissipation
4.French 8 degree Gaggione lens
5.Latest edition of IC chip 6205, promote speed
6.Strong twisting force motor
7.PFC power supply
8.Neutrik PowerCon power cord, quick lock
INSTALLATION:
Vertical hanging or flat on the ground directly, not recommended side hangIing that is easy to damage
the lamp. If needed hook effect, please consider security problems of engineering installation.
Delivery time: sample (3-5 days) formal order (15-20 days)
Main market: Europe and the United States, South America
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling,suspension, trussing).
3)Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4)The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled inst- aller and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to thelights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumul- ation of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circ- uit contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alco- hol or solvents
There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
