High-Quality and Various Types of Electrode

Product Description:

1.Product Quick Details

The electrode is the metal coating in the welding core (coating), uniform radial pressure applied to core. Electrode of the metal core, cores, in order to ensure the quality and performance of weld seam, on the content of metal elements in the cores have strict rules, especially the content of harmful impurities (such as sulfur, phosphorus, etc.), there should be strict restrictions, better than the parent metal. The electrode consists of two cores and coating composition. The core component directly affects the composition and properties of weld metal, so the harmful elements in the welding core to as little as possible.

2.Product Characteristic

Aluminum magnesium alloy wire ER5356 performance characteristics: This product containing 5% of the magnesium alloy wire, is a widely used generic type welding, suitable for welding or surfacing 5% magnesium casting aluminum alloy, high strength, good ductility, good resistance to corrosion. This product can also provide a good color for the welding of the treatment of the sun. Typical chemical composition mg 5, Cr 0.10, (Fe + Si) 0.3, Cu is less than or equal to 0.05, Zn 0.05, Mn 0.15, 0.1 Ti Al margin use: bicycle, aluminium scooters and other sports equipment, locomotive cars, chemical pressure vessel, ordnance production, shipbuilding, aviation and other industries. Aluminum magnesium alloy welding wire ER5183 performance characteristics: This product is a magnesium alloy welding wire of 3%, suitable for welding or surface welding of the same grade of aluminum alloy material.

3.Specification

Electrode excellent red stripe, widely used in the production of hot forging and cold punching die, anti abrasion hardfacing and hardness of high stability, used in hot forging die, stamping die, die, trimming cutting die, cars, hot rolling wheel, abrasion consumption parts hardfaced making.

CMC-E60AHRC 60~622.6, 3.2

60~622.6 CMC-E60AHRC, 3.2

High hardness, high temperature wear resistance. Applicable to carbon steel and low alloy steel hardfacing production, repair wear tool parts, cars, the hot forging cold forging cutting mould welding.

CMC-E30N high tension, high toughness 2.6, 3.2

High hardness steel bonding, die cast steel hardfaced seat is fixed, making render buffer layer, the welding crack.

CMC-E61N3.2*350mm

CMC-E61N3.2*350mm

Suitable for all kinds of cast iron, alloy cast iron, steel and cast iron, nickel and its alloy, etc., or water resistant die welding.

CMC-E7WHRC 53～55 3.2, 4.0

CMC-E7WHRC 53 ~ 4, 553.2

4.Reference Picture