Loading Port:China Main Port
Payment Terms:TT or LC
Min Order Qty:1 unit
Supply Capability:100 unit/month
High pressure mill Introduction:
Pressure micro-grinding (high pressure mill, powder, or powder mill) mainly by the host, blowers, fine analysis machine, finished product powder cyclone, bag filter and connecting duct piping and other components, according to user needs can equipped with elevators, storage silos, control cabinet, powder machine, crusher and other auxiliary equipment. In the micro-grinding grinding chamber, roller assembly through cross arm hanging roller hanger, roller hanger with the spindle and turret fixed link shovel, pressure spring tension rod tightly pressed by the roller bearing chamber on the outer end of the boom to the cross arm shaft for the support by the spring pressure grinding rolls so tightly pressed grinding ring round the surface, when the motor is rotated by a drive unit, mounted on the turret on the shovel blade and roller synchronous rotation, grinding roller grinding ring round the surface while rolling around its own rotation, analysis machine driven by the motor drives the impeller rotating machine analysis, the analysis of the speed adjustment to the powder fineness.
Micro-grinding product size can be adjusted within the range 80-325 mesh, part of the material up to 600 mesh.
High pressure mill Usage:
High pressure mill is mainly applied to thepowder processing of mineral products in the industries of metallurgy,construction materials, chemical, and mining, etc. It can producepowder from various non-flammable and non-explosive mineral materialswith Mohs hardness below 9.3 and humidity below 6%, such as barite,limestone, kaolnite, ceram and slags, etc. The Product size isadjustable in the range of 80-425 mesh. It is possible to produce 30-80mesh coarse powder through special device in the machine if necessary.
High Pressure Grinding Mill Feature:
1. High capacity.
2. Wide size range of final product (30 mesh-1000 mesh)
3. National dust-dump standard.
4. Easy to adjust separator.
5. Multi-class seals
High Pressure Grinding Mill Technical Data:
Feeding size（mm） | ≤25 | ≤20 | ≤15 |
granularity（mm） | 0.125-0.010 | 0.125-0.010 | 0.125-0.010 |
class（t) | 2-21 | 0.5-12 | 0.2-8 |
speed（r/min） | 160 | 160 | 180 |
Ring diameter（mm） | 1006 | 907.5 | 725 |
Grinder diameter（mm） | 300 | 270 | 210 |
Grinder length（mm） | 160 | 150 | 150 |
Main motor | Y225m-8-30 | Y225m-8-22 | Y225m-8-15 |
Fan motor | Y160E-2-22 | Y160L-4-15 | Y160L-4-11 |
Analyzer motor | Y112m-4A-3 | Yc120-4A-3 | Yc120-4A-3 |
