Loading Port:China Main Port
Payment Terms:TT or L/C
Min Order Qty:1 Set set
Supply Capability:100 Sets Per Month set/month
Specification of Hammer Crusher for sand making
Type | Feeding inlet
size (mm) | Max feeding
size (mm) | Rotor
Diameter (mm) | Rotor
length(mm) | Discharging size
(sieving remaining)
≤15% | Capacity
(t/h) | Motor
Power (kw) | Weight (No Motor)
(t) |
PCF-1412 | 1290×1320 | 600 × 600 × 900 | 1420 | 1200 | ≤25 | 80-130 | 200 | 23.5 |
PCF-1616 | 1500×1785 | 800 × 800 × 1000 | 1650 | 1630 | ≤25 | 130-240 | 315 | 43.3 |
PCF-1817 | 1750 × 1840 | 900 × 900 × 1200 | 1850 | 1730 | ≤25 | 240-350 | 560 | 70 |
PCF-2018 | 2268 × 2 130 | 1000 × 1000 × 1000 | 2020 | 1802 | ≤25 | 350-450 | 630 | 89 |
PCF-2022 | 2100 × 2380 | 1000 × 1000 × 1500 | 2010 | 2230 | ≤25 | 400-600 | 800 | 128 |
Usage of Hammer Crusher for sand making:
1.Hammer crusher(hammer mill) are applicable for various hard and fragile materials,such as
limestone, coal, salt,gypsum,alum,brick and tile,etc.
2.The crushing compressive strength of materials should not be in excess of 150Mpa.
3.Hammer crusher is mainly used in industries such as cement, coal separation,electricity generation,
building materials and compound fertilize,etc.
4.And hammer crusher can crush materials with different sizes into equal particle,which favors
the next procedure.
5.The advantages of hammer crusher are reliable mechanical structure,high productivity and
favorable applicability.
The impact crusher crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharge from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out the machine by the impact rack in the front and back of the machine.
Picture of Hammer Crusher for sand making:
