H.F pipe line / Ф219 Pipe Mill roll forming machine

Product Description:

Structure of Ф219 Pipe Mill Description

Material to be processed:Carbon Steel, Cold  Hot Rolled pre slit strip coils of weld able grade with max. 0.2% carbon. Type of Production: * Round Tubes*Squar *Square and Rectangular Hollow Sections Round Tube Outside Diameter: Min 114  Max 219mm. Square Hollow Section: Min 90 x90  Max 170x170 mm. Rectangular Hollow Section: Min 80x 100  Max140x 200 mm. Tube Thickness: Min 2.2  Max 8.0 mm

Main Features of Ф219 Pipe Mill Description

The mill is continuous production, which is no need to change the rollers in rough-forming section when the specification needs to be changed. Compared with ERW, the quality and energy consumption of CFOE is easier to be controlled, and is welded better and low consumption. The welding seam of CFOE overcomes the shortages of long welding seam and difficult inspection on spiral welding seam after inbuilt. Compared with UOE and JCOE, the investment cost and production cost are low. The quality of CFOE welding seam is the best in all welding seam technology. CFOE is the most reliable, and there is no circular interface welding seam on the pipe, which is easy to weld, inspect, maintain and repair. The pipe produced by the mill just covers most pipes which are currently used by oil, gas casing. The mill also has a good market prospect. Annual production capacity is 50,000-100,000 tons.

If there are small differences between CFOE cost and spiral welded pipe cost, nobody will buy spiral welded pipe on high grade pipeline. CFOE welded pipe will replace fully spiral welded pipe in high grade pipeline, and have a good market prospect.

CFOE can be the complement mill for the JCOE mill. Because it is hard and uneconomical for UOE and JCOE to produce the pipes within the diameter range of Φ219～Φ711. There are outstanding advantages such as less production cost and high production capacity. Due to low production capacity and over high price of JCOE mill, which create the serious competition problem, it can make up middle and large diameter in JCOE.

CFOE mill Specification

Rolling bottom line (mm): 900mm

Pipe diameter :Square □120×120～□400×400mm
             Rectangular □100×130～□300×500mm

Wall thickness: 3.0～12.7 mm

Strip width : 480～1600mm

Forming speed : 0～15m/min 

Driven Stands :16.   roll Shaft diameter 230mm 

Idle side Roll Units 8. roll Shaft diameter 130mm

Power of high-frequency unit: 800kW

Main motor: model (DC) power 200kw×2  250kW speed 500/1600rpm

Strip width : 480～1600mm

Forming speed : 0～15m/min 

Cut-to-length accuracy: ± 3 mm (electronic flying saw)

Overall dimension :length 150,000mm

Images

FAQ

How do you guarantee the quality?

We can provided CE certificate if we are required.

What's the delivery time?

around 120days after receive your 30% payment.

Where can we see your machines?

You are welcome to visit our factory and test it by yourself.