Edge Plane Pyrolytic Graphite Electrode with Nipple - Good Quality

Product Description:

Packaging & Delivery

Specifications

G-High Graphite Electrodes have the properties of superior electric conductivity and chemical stability, high mechanical strengt

G-High Graphite Electrodes are made from Petroleum Coke and Needle Coke, using Coal Tar Pitch as agglutinant, produced through the process of calcining, mixing, kneading, compressing, roasting, graphitization and machining, etc.

G-High Graphite Electrodes have the properties of superior electric conductivity and chemical stability, high mechanical strength, less impurity, seismic performance in high temperature. G-High Graphite Electrodes are mainly used for steel-making in electric furnaces, mineral hot furnaces and electric resistance furnaces.

Graphite Electrodes conduct electric current into the furnace. Electric current produces arc in the smelting district, when the temperature increases to about 2000°C, smelting begins. Our series of Graphite Electrodes are applicable to the common furnaces and high power furnaces with high voltage and short arc. G-High Graphite Electrodes are classified into three classes.

NP Graphite Electrodes: mainly used in common power electric ovens for smelting steel, smelting silicon and smelting yellow phosphorus;  

HP Graphite Electrodes: mainly used in high power electric ovens for smelting steel;

UHP Graphite Electrodes: mainly used in ultra high power electric ovens for smelting steel.

Graphite Electrode

Grade: RP

Diameter: 100~ 600 mm 

Length: 1500-2700mm

Nipple: 3TPI, 4TPI, 4TPIL

Material: Made of high quality petroleum coke, needle coke and coal tar pitch, appreciated by many foreign clients.

We can manafacture and export graphite electrodes in different grade ,shape and dimension.Whenever you need it ,please feel free to let us know.we promise you the top quality and lower price.   

Instructions of usage for Graphite Electrode: 

Notes of usage: 

1.To Place the nipples, first use compressed air to clean the hole, then carefully screwed the nipples into it (do not damage the thread). 

2.To connect the electrodes, when there’s 20-30mm distance between the two electrodes, using compressed air to clean the two extremes. 

3.Connector locations should be selected c-map. 

4.When use the wrenches to connect electrodes, should be fully tighten to specified torque. 

5.To avoid electrode broken, please remove the insulating material in the furnace. 

6.To avoid electrode broken, pls. place the big block in the lower and smaller block at the upper.  

We can manafacture and export graphite electrodes in different grade ,shape and dimension.Whenever you need it ,please feel free to let us know.we promise you the top quality and lower price.