Gel Battery the AcmeG Series Battery AG12V100F

Product Description:

Range summary

The AcmeG range front access gel batteries is designed based on  the Acme series, using the polymer gel electrolyte with real front access structure. The state-of  the-art internal and external design ensures   AcmeG the high reliability and makes the  installation quite simple and safe when  placed on a standard relay rack tray or  in a closed cabinet. AcmeG range gel battery   is designed with high energy density and    suitable for 19". 23" rack or  cabinet.

Technical features

• Long life
   Using the polymer gel electrolyte
   4BS paste technology
   Special paste formula
   Special patented grid alloy

• Wide operational temperature range
   Excellent charging and discharging ability  at low temperature 
   Decline the water-loss at high temperature 

• special structure
    real front access structure makes the installation and maintenance squite simple  and safe 
    suitable for 19". 23" rack or cabinet
    The specially centralized venting system  ensures the small gas be vented our of the closed cabinet

  
  

Compliant standards
Designed to be compliant with:

• IEC 60896-2

• BS 6290 Part 4

• Telcordia SR-4228

• EUROBAT GUIDE

• UL

• Manufactured under system ISO9001 &  ISO14001 by NARADA
  

Battery installation compliant with:

• EN 50272-2 or local equivalents

Main applications

• Telecom standby and cyclical applications

• UPS

• Power plant and power transfer system

• Solar energy system

• Emergency lighting system
  

Products characteristics:

• float voltage: 2.25Vpc at 77^oF(25^oC) , Equalization charge voltage: 2.40Vpc at 77^oF(25^oC)

• Self discharge rate: < 2% pre month at 68^oF(20^oC)

• Design life: more than 12 years at  68^oF(20^oC)

• Shelf life: 6 months at 68^oF(20^oC)

• Recombination efficiency: >99%

• the Pressure at which the valve opens  & reclose is Opened at 10 to 35kpa(1.45psi to 5.08psi) and

• closed at 3 to 15 kpa (0.44psi to 2.18psi)

• Temperature ranges: -40^oC to 50^oC

• Terminal Hardware Torque:10±0.1N  m

• Container Material: ABS (V0 optional)

FAQ

What is a Gel Cell Battery?

A gel battery design is typically a modification of the standard lead acid automotive or marine battery. A gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one way valves in place of open vents, this helps the normal internal gasses to recombine back into water in the battery, reducing gassing. "Gel Cell" batteries are non-spillable even if they are broken. Gel cells must be charged at a lower voltage (C/20) than flooded or AGM to prevent excess gas from damaging the cells. Fast charging them on a conventional automotive charger may be permanently damage a Gel Battery.

What is sulfation of batteries?

Sulfation is the formation or deposit of lead sulfate on the surface and in the pores of the active material of the batteries' lead plates. If the sulfation becomes excessive and forms large crystals on the plates, the battery will not operate efficiently and may not work at all. Common causes of battery sulfation are standing a long time in a discharged condition, operating at excessive temperatures, and prolonged under or over charging.

How long a battery can last?

The service design life of a battery are vary considerably with how it is used, how it is maintained and charged, temperature, and other factors.

Do batteries self-discharge when not in use?

All batteries, regardless of their chemistry, self-discharge. The rate of self-discharge depends both on the type of battery and the storage temperature the batteries are exposed to. However, for a good estimate, Narada batteries self-discharge approximately 4% per week at 80ĄăF.