Gasket EPDM ISO4633 SBR Rubber Ring DN80-DN1000

Product Description:

1.Description of Gasket :
Ginseal Spiral-wound gaskets comprise a mix of metallic and filler ma- terial. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flex- ible graphite) wound in the same manner but starting from the opposing side. This results in alternating layers of filler and metal. The filler material in these gaskets acts as the sealing element, with the metal providing structural support.

2.Features of Gasket :
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel t
3.Gasket Images:

4.Specifications of the Gasket:
1.A good compression ratio and elasticity.
2.With plastic appropriate, after pressing can adapt to the sealing surface and sealing surface uneven fill the gap, to ensure good sealing performance with the temperature and pressure in the system of alternating case.
3.With excellent corrosion resistance, not to be damaged in some extreme medium, does not have the expansion and contraction.
4.Under the condition of high temperature softening, does not creep; under the condition of low temperature hardening, does not shrink.
5.Have sufficient strength, when external load conditions, not be crushed; at high temperature, not blown out.
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would raise the price by any reason.
               2.They willn't provide the high qualities to you cause it had the cheap price.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:What's the FOB port?
Anser:Our port are Shanghai and Ningbo usual.