Specifications
Full automatic color tile making machine
1.Automatic cut off, adopt after -cutting
2.Competitive
3.CE
Full automatic color tile making machine
1.Introduction
The machine shown in the illustration is to produce wall panel. When the steel sheet is passing through the rollers, it has fine shape and be cut into required length.
At present, the wall panel forming machine produced by our company is the roll forming machine for wall profiles which is successfully developed by our company based on advanced technology home and aboard.
2.Equipment composition:
(1) Main Machine,
(2) Manual/Hydraulic Decoiler
(3) Hydraulic System,
(4) PLC Computer Controlling System,
(5) Forming Cutter
(6) Run out Table(3 pcs)
3.Main Technical Parameter:
| Suitable to process | Color steel plate |
| Thickness of the plate | 0.3-0.8mm |
| Width of the plate | 1-1.25m |
| Productivity | 6-8m/min |
| Rollers | 10 |
| Rolling material | Forging steel 45# |
| Diameter of the roller | Φ70mm |
| Mould material | 45#,lathe-turning,chrome-plating |
| Frame | 250H |
| Specifications of frame | Q235 |
| Thickness of the frame | 12mm |
| Chian | 15.24mm |
| Reducer | NO.4(speed ratio1:59) |
| Control system | PLC |
| Size | 5*1.4*1.2m |
| Weight | 2.5t |
| Main motor power | 3kw |
| Hydraulic power | 3kw |
| Voltage | 380V or 220V |
