FRP Pipe Factory Direct, Wholesale DN200, DN300, DN500 Fiberglass Pipe

Product Description:

1. Structure of FRP Process Pipe Description

Good corrosion resistance, no effect on water quality. FRP pipe can resist acid, alkali, salt, water, untreated sewage, corrosive soil or groundwater, and many chemical fluid erosion. 

At a 30 ℃ state, FRP pipe still has good toughness and high strength, at a 50 ℃ - 80 ℃ in the range of long-term use, the use of specially formulated resin also at least 11O ℃ temperature, and working.

‍

2. Main Features of FRP Process Pipe

‍‍

‍‍Produced using filament winding,Fiberglass Reinforced Plastic, their proportion in the 1.65-2.0, only 1/4 of the steel, but the ring to the tensile strength of the glass tube is 180 - 300MPa, axial tensile strength of 60 - 15OMPa, approximate alloy steel.‍‍

FRP pipe is non-conductor, insulation resistance at 1012 - 1015 Ω • cm, best adapted for use in power transmission, telecommunication lines and more densely populated areas mined; FRP pipe heat transfer coefficient is very small, only 0.23, a 5 ‰ steel. 

‍

3. FRP Process Pipe Images

4. FRP Process Pipe Specification

1)Small specific gravity, light weight: FRP pipe’s specific gravity is 1.65-2.0 and one 1/4 compared with steel; hoop flexible tensile strength for FRP pipe is 150-420 MPa and axis tensile strength is 60-150MPa, similar to alloy steel. FRP pipe’s strength/specific gravity is 2 or 3 times compared with alloy steel so it can be designed according to customers different requirements for various pips bearing inside and outside pressure. For the same diameter pipe, FRP pipe’s weight is 1/2.5 compared with carbon steel pipe, 1/3.5 compared with cast iron pip, 1/8 compared with reinforced concrete pipe, so it’s easy for construction and transporting.

2) Fewer joints and efficient installment: Usual pipe’s length is 4-12 meters(other special length is also available according to customer demands). Single pipe is long with few joints to accelerate installment speed and reduce the fault possibility then improve efficiency of quality of construction of whole pipe.

5. FAQ of FRP Process Pipe

We have organized several common questions for our clients，may help you sincerely：

①How about your company？

One of the leading manufacturers and suppliers specializing in FRP pipe products in China. The integrated sales & service ensures customers with various demands an easier access for purchasing management.

②How to guarantee the quality of the products？

We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible.