Fiberglass Mat Tissue Woven Roving Combo Fabric for Vehicle Bodies

E-Glass Woven Roving Combo Mat is a complex mat made by stitching together woven roving and a layer of distributed chopped strand. Its main specification is woven roving （300g/m2~900g/m2） with chopped strands （50g/m2~500g/m2）。 The product has a maximum width of 110 inches. This product can be used for boat manufacturing.

This mat is a combination of woven roving and chopped glass fiber. The layer of chopped strand is stitched together with woven roving by polyester thread. It is mainly applied in the processes of molding compressing, pultrusion, RTM, filament winding etc..This fabric is compatible with UP Resin, Vinyl ester resin, epoxy resin system etc. It is widely used in vehicle bodies and panels, marine (boat hulls and decks), pipeline, lamination and structural profiles etc.

 2.Product Features

Increase strength, reduce product weight and better surface finish.
low resin-consumption and faster wet-out.
Good manufacturability and mechanical properties
Improved fatigue and impact resistance

3.Technical Specifications

4.FAQ

Packing:

Each roll is wrapped by PE film and then packed into carton. Stacking in bulk or palletized is available; the pallet shall be no higher than 2 layers.

Storage：
Unless otherwise specified, It should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃～35℃ and 35%～65% respectively.