Fiberglass Tape FGT-160

Product Description:

General Information of of Fiberglass Tape FGT-160

1. Filament / fiberglass tape is with PET film and one-directional fiberglass.

 2. The tape is with high tensile strength, used for palletizing, holding, bundling, reinforcing, heavy duty packing, carton packing & sealing.

 3. Standard cut roll packing: one roll per plastic bag, then into cartons. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.

CONSTRUCTION of Fiberglass Tape FGT-160 

Backing: One directional Fiberglass + PET film

Adhesive: Hot melt rubber based adhesive

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + backing): 130micron

Initial Tack: more than 18# steel ball

Tensile Strength: more than 180N/25mm

Peel Adhesion: 13 N/25mm

Holding power: not less than 30h (1kg/25mm)

Temperature resistance: 60C

Elongation: 0.3%

Sizes of Fiberglass Tape FGT-160

Jumbo Roll: 1.02 x 1000m

Cut Roll: As per customer's requirements

Remarks of Fiberglass Tape FGT-160

The data above are typical results and subject to change without notice.

1. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.