Fiberglass Mat Tissue - Multiaxial Fabric-UD Series 350gsm/50gsm
Loading Port:Shanghai
Payment Terms:TT or LC
Min Order Qty:10000 kg
Supply Capability:100000 kg/month
Product Description:
Product Introduction
This fabric is made of fiberglass roving which are aligned at 0° or 90° into one layer of roving by stitching together with or without one layer of chopped strand. It is mainly applied in the hand lay up, RTM and other close molding processes. This fabric is compatible with UP Resin, Vinyl ester resin, epoxy resin system etc. It widely used in nacelles and blades for wind power, boat hull, cases and shell of auto etc.
Product Feature
Code
Total weight g/m2
Weight of each layer, g/m2
Width mm
0°
90°
+45°
-45°
Chopping
E-L300
350
300
50
200～2600
E-L350
400
350
50
200～2600
E-L400
450
400
50
200～2600
E-L450
500
450
50
200～2600
E-L500
550
500
50
200～2600
E-L600
650
600
50
200～2600
E-L650
700
650
50
200～2600
E-L900
930
880
50
200～2600
E-L700/200
950
700
50
200
200～2600
E-T200
200
200
200～2600
E-T450
450
450
200～2600
E-T500
500
500
200～2600
E-TM300/300
600
300
300
200～2600
E-TM600/450
1050
600
450
200～2600
E-LM750/200
950
750
200
200～2600
FAQ
Packaging： Each roll is wound onto a paper tube which has an inside diameter of 76mm and the roll has a diameter of 275mm. The roll is wrapped up with plastic film，and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets. Storage： Unless otherwise specified, It should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃～35℃ and 35%～65% respectively.
