Fiberglass Backed Ceiling Tiles - High Quality Fiberglass Ceiling Acoustic Soundproof

Product Description:

Description

Thefiberglass acoustic tiles uses fiberglass with high quality as base material. It has high soundabsorption coefficient, good heat preservation & heat insulation performance, good fireproof performance, excellent levelness and unique character on decoration. The acoustic tiles is helpful to improve indoor sound environment, develop the functions of buildings, increase working and lift quality ,and benefit people's health and safety.  The acoustic tiles is a high grade new type ceiling material in the world, which is suitable for interior space with not only moderate or high hospitals, governmental office buildings and business office buildings, super shopping centers, etc.

Characters:

1.Light weight: with light weight, Huake  acoustic tiles can reduce the load on ceiling of building, therefore, it

 is easy to move and install and reduce the factors that not safety.

 2.Fireproof: Huake acoustic tiles meets grade A incombustibility of national fireproof ceiling material.

 3.Sound reduction : The sound absorption coefficient (NRC) of Huake acoustic tiles is 0.9 to 1.0, therefore,

 sound wave will not reflect on its surface, which can effectively control and adjust indoor reverberation time,

 reduce noise and improve timbre.

 4.Damp-proof: With its excellent damp-proof performance, fiberglass doesn't absorb wet from the air. As a

 result, the levelness of the material will not overall change in wet environment.

 The tile is made by highdensity fiberglass with compound decoration wool on the surface and fiberglass wool in the back. The edges are painted. With the characteristics of square in edges and angle, it will be parallel to suspension system after installation.

Installation method:

-use exposed grids with width of 15mm or 24mm

-tiles are easy to trim and install

Description:

1.Superposition joint part between main carrier and vice carrier or vice carrier and carrier is called point lap.

2.It uses lap structure to assembly, connection between joints dovetail very well. The joint face unknits and have a nice appearance.

3.There is a barb at the vice carrier joint, it can avoid loosing and falling from the infection of outside force.

4.Soleplate of main and vice carrier is zincification armor plate, which meets the national GB standard demand. We use baked paint zincifcation armor plate as baked paint panel,whoes capacity of zincification is high. It meet the national GB standard demand.

5. Raw Meterial is galvanized steel with 80-100g/sqm

FAQ

1.Sample: small sample can be offered by free

2.OEM: OEM is accepted

3.MOQ: small order is ok

4.Test: any third party is accepted to test

5.Factory: Can visit factory any time

6.Delivery Time: small order is within 7days or according to your order