Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1 unit
Supply Capability:10 unit/month
Design |
Overview of technical data
Type of impeller | Multi- vane impeller;Closed;Closed / Radial;Radial |
Type of installation | Close- coupled |
Maximum drive rating | 18 kW |
Impeller material (EN standard) | JL1040; JS1025 |
Type of bearing | Plain bearings |
Drive frequency | 50 Hz / 60 Hz |
Maximum speed of rotation | 3. 500 1/min |
Maximum flow rate | 250 m³/h |
Maximum discharge-side pressure | 16 bar |
Casing material (EN standard) | JS1025; JL1040 |
No. of impeller entries | Single entry |
Casing material | Cast iron; Nodular cast iron |
Minimum flow rate | 3 m³/h |
Suction characteristics | Non- priming |
Drive voltage | Low voltage |
eClass assignment | 36410100; 36410101;36410000 |
Pull-out design | Yes |
Pump set location | Dry installed |
Max. permissible fluid temperature | 140 °C |
Main applications | Industry and process engineering |
Type of installation | Stationary |
Type of casing | Volute casing |
Type of connection | Flange |
Type of lubrication | Oil / Product lubrication |
Type of drive | Electric motor |
Installation position | Horizontal or vertical |
Shaft material (EN standard) | 1. 4021 |
Type of coupling | Direct |
Shaft seal type | Canned motor pump |
Drive | IEC standardized motor |
Maximum head | 100, 00 m |
Maximum rated pressure (discharge) | PN 16 |
Minimum head | 9, 00 m |
Nozzle position | End suction |
Casing partition | Radially split |
Connection to power supply | 220/ 400/690 V, 3~ |