Environment-Friendly Exterior Wall Paint

Product Description:

1.Product Description:

This application process is suitable for the common application of latex paints on concrete, cement mortar, brick and stone, exterior thermal insulating substrate and other exterior building walls.This application process is utilized widely because of safety of construction, colorful and soft gloss film, smooth and flat hand feeling, possibility to combine with various types of coatings, and low cost.Major advantages: environment friendliness because of aqueous coatings, health and nontoxicity, excellent weatherability, and anti-bacterial, anti-fungus, and anti-scrubbing properties.

2.Technical Parameters：

Component Silico-modified acrylic resin, titanium, fillings, paint,additives and water Glossiness Flatting

Theoretical Spreading： Rate 8~10 m2/L(based on the dry film thickness of 35 microns)

Drying Period Surface dry: 1 hour (23℃ and 50% relative humidity)

Full dry: 2 hours (23℃ and 50% relative humidity)

Repainting time: 4 hours (23℃ and 50% relative humidity)

Contrast Ratio ＞0.93

Weathering Resistance: Good

Security: No Lead or Mercury in the material

Construction： Tool Paintbrush, roller or airless sprayer

Dilution: Diluted with clean water

Wet Film Thickness： Approximately 85~100 microns (for the first time)

Dry Film Thickness Approximately 32~35 microns (for the first time)

3.How to use  Exterior Wall Paint?

Paint Tool: brush and roller

Firstly: paint brush 15~20% roller 5~10%

Secondly: paintbrush 5~10% roller 5~10%

Tool Cleaning Immediately clean with clean water after use

4.Construction Condition：

Above 5℃ and under 75% relative humidity

5.Remarks：

Sufficient dilution is not allowed