Environment-Friendly Exterior Wall Coating

Product Description:

 1.Product Description:

This Environment-Friendly Exterior Wall Coating application process is suitable for the common application of latex paints on concrete, cement mortar, brick and stone, exterior thermal insulating substrate and other exterior building walls.This application process is utilized widely because of safety of construction, colorful and soft gloss film, smooth and flat hand feeling, possibility to combine with various types of coatings, and low cost.Major advantages: environment friendliness because of aqueous coatings, health and nontoxicity, excellent weatherability, and anti-bacterial, anti-fungus, and anti-scrubbing properties.

Technical Parameters

2.Technical Parameters：

Component: Silico-modified acrylic resin, titanium, fillings, paint, additives and water

Glossiness: Flatting

Theoretical Spreading Rate: 8~10 m2/L(based on the dry film thickness of 35 microns)

Drying Period Surface dry: 1 hour (23℃ and 50% relative humidity)

Full dry: 2 hours (23℃ and 50% relative humidity)

Repainting time: 4 hours (23℃ and 50% relative humidity)

Contrast Ratio ＞0.93

Weathering Resistance: Good

3.How to use  Exterior Wall Paint?

Construction: Tool Paintbrush, roller or airless sprayer

Dilution: Diluted with clean water
Paint tool:brush and roller

4. Paint Processing:

Firstly: paintbrush 15~20% roller 5~10%
Secondly: paintbrush 5~10% roller 5~10%

Wet Film Thickness: Approximately 85~100 microns (for the first time)

Dry Film Thickness: Approximately 32~35 microns (for the first time)

Tool Cleaning: Immediately clean with clean water after use

5.Construction Condition：

Above 5℃ and under 75% relative humidity

6.Remarks：

Sufficient dilution is not allowed