Fiberglass Mat Tissue E-Glass Fiber Chopped Strand Mat Emulsion Bonded

Product Description:

1.Brief Introduction

E-Glass Emulsion Chopped Strand Mat is made of randomly distributed chopped strands held tighter by a emulsion binder. It is compatible with UP, VE, EP resins.
It is compatible with UP, VE, EP, PF resins.
Additional demands on wet-out and decomposition time may be available upon request. 
It is designed for use in hand lay-up, filament winding,  compression molding and continuous laminating processes. Its end-use applications include boats, bath equipment, automotive parts,  chemical corrosion resistant pipes, tanks, cooling towers and  building components                                                                          
2.Product Features
Fast breakdown in styrene
High tensile strength, allowing for use in hand lay-up process to produce large-area parts
Good wet-through and fast wet-out in resins, rapid air lease
Superior acid corrosion resistance 

3. Product Specifications

Fiber type: E-glass

Unit weigth:100g/m2 150g/m2 200g/m2 220g/m2

Binding type: Powder or Emulsion;

Roll width: 50mm-3300mm

Roll weight:30kg/roll

4.FAQ

Packaging：
Each Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 275mm. The mat roll is wrapped up with plastic film，and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets.
Storage：
Unless otherwise specified, Chopped Strand Mat should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15℃～35℃ and 35%～65% respectively.