DX DIGTAL PRESSURE CONTROL FOR PUMPS

Product Description:

DX TYPE USED FOR PUMPS

Pressure control is adjustable ,the judgment of water shortage protection is accurate.

It has freedom of rotate 320 degrees, elegant appearance and excellent quality.

It is suitable for self priming pump installation.

Model：DX-01

Normal working voltage ：140V~280V

Pressure range：0-10KG        

Fluid temperature：0-100      

Maximum power：1500W      

Maximum current: 20A      

Service life ：More than 150000 times

How to set

1.Adjust pressure upper limit

A),Short press left key,  show  pressure  upper  limit.

Then long press left key 2 seconds, LED show‘PUP’,

go to pressure upper limit adjust.

B),Short press left key=plus 0.1,

    long press left key=plus 1.0.;

C),Short press right key=minus 0.1,

    long press right key=minus 1.0;

D),Automatically exit after 3 seconds, go to current

displayed pressure.

2.Adjust pressure lower limit

A), Short press right key,  show  pressure lower limit.

Then long press right key 2 seconds, LED show‘pdn’,

go to pressure lower limit adjust.

B),Short press left key=plus 0.1,

    long press left key=plus 1.0.;

C),Short press right key=minus 0.1,

    long press right key=minus 1.0;

D),Automatically exit after 3 seconds, go to current

displayed pressure.

3,The power voltage display

A)Long press left key 2 seconds, LED show ‘Vol’, go to show the current power voltage.

B)If long press right key 2 seconds, LED show ‘Vdd’, go to show PCB DC voltage.

C)Short press left key or right key, you can exchange the state of  A) and B).

D)Automatically exit after 3 seconds, go to current displayed pressure.

4,ON/OFF

A)Press left key above 5 seconds, you can run or stop the pump.

B)If press right key above 5 seconds, the pump is off, LED shows ‘OFF’and cancel countdown.5.

5,Child Lock

Long press double key 2 seconds, the pressure switch is locked and can’t amend parameter.

The last decimal point shining.

Long press double 2 seconds, remove locked.

6.Countdown

A)Press double above 5 seconds, LED shows‘tHt’, go to adjust countdown.

B)Short press left key=plus 0.1 hour=6 minutes. Long press left key= plus 1.0 hour.

CShort press right key= minus 0.1 hour. Long press right key= minus 1.0 hour.

D)Time is over, you can stop or run pump. If you stop pump, will show ‘OFF’.

E)Press right key above 5 seconds, countdown will cancel. The pump is off ,and show ‘OFF’.

Warning information

1.‘12.3’ or‘4.5’or‘P6.7 = current pressure display format, unit kg/cm².

2.‘EUH’ means Error High voltage, power voltage is greater than 265Vac.It is safer.

3.‘EUL’ means Error low voltage, power voltage is less than 145Vac.It is safer.

4.‘SEn’ means Senscr Error. It will stop.

5.‘PLO’ means Low Pressure.

6..‘dry’ means real dry. It is no water safly. If you want to run the pump, you will run manually.

7.‘HZO’ means no water. The pump will restart within 5 minutes if no water.

8.‘OFF’ means turn off.

9.‘SPH’ means deadhead. The pressure can’t reach upper limit. The pump will stop.

10.‘t1.2’ means timer, unit is hour. Also the pressure shows double digit, unit Bar,

For example ‘P3.4’.