Herma Double Sided Tissue Tape V-13C

Product Description:

 General Information of Double Sided Tissue Tape V-13C

 1. Applications:

 Courier envelope sealing, flying splice operations on papers and cardboard, leather and fabric bonding and positioning in shoe and baggage industry, sheet fixing and bonding in toy industry, stationery, advertisement, computer embroidery, packaging and foam laminating.

 2. The products should be stored at room temperature and be kept away wet and/or heat source.

 3. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

 4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.

 5. Special requirements will be satisfied after communications.

Technical Data of Double Sided Tissue Tape V-13C

CONSTRUCTION:

Carrier: Tissue paper

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + tissue): 130 micron

Rolling Tack (11mm steel ball): less than 10 cm

Peel Adhesion: more than 20 N/25mm (20 min dwell on stainless steel)

Holding power (23 centigrade, 1kg): not less than 16 hours

Adhesion to liner: 0.5 N/25mm

PACKING of Double Sided Tissue Tape V-13C

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.02 x 1000m; 1.24 x 1000m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

Remarks of Double Sided Tissue Tape V-13C

The data above are typical results and subject to change without notice.

1. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.