Trazon Double Sided OPP Tape DS-90H for Industry

Product Description:

Quick Details Of Double Sided OPP Tape DS-90H For Industry:

 PACKING Of Double Sided OPP Tape DS-90H For Industry:

1. Core I.D.: 3” (76mm+/-1)

Jumbo Roll：1.02 x 1000m; 80 rolls/20' without pallets

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up; several rolls in a plastic bag and then certain quantities into a carton, finally load cartons into container with or without pallets.

2. We could supply both white and clear adhesive on OPP film.

3. Different thickness is available according to requirements.

4. Special requirements will be satisfied after communications.

CONSTRUCTION Of Double Sided OPP Tape DS-90H For Industry:

Carrier: OPP film, 25 micron

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES Of Double Sided OPP Tape DS-90H For Industry:

Total Thickness (adhesives + OPP film): 90 ± 5 micron

Initial Tack (14# steel ball): ≤80 mm

Peel Adhesion (Kg/25mm): 1.2 ± 0.2 Kg

Holding power: ≥ 200 min

Remarks Of Double Sided OPP Tape DS-90H For Industry:

1.         The data above are typical results and subject to change without notice.

2.         Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.         The products should be stored at room temperature and be kept away wet and/or heat source.

4.         It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.         The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.