Double Sided EVA Foam Tape DSE-10YM

Product Description:

CONSTRUCTION:

Backing: EVA Foam

Adhesive: Hot melt rubber adhesive.

Liner: Yellow/white paper

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + backing): 1 mm

180° Peel Adhesion: more than 1.5 kgf/25mm (to steel)

Holding power: not less than 50h

Temperature resistance: 60DC

Elongation: 50%

Sizes:

Jumbo Roll: 1020mm x 300m

Cut Roll: As per customer’s requirements

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.