Loading Port:Tianjin
Payment Terms:TT OR LC
Min Order Qty:5 m.t.
Supply Capability:5000 m.t./month
Alloy Steel Coil
Product Description
Characteristics
High hardness, wear resistance, good toughness, high resistance against compression load and impact, good dimensional stability during heat treatment and good machinability.
Application examples
Cold work tools
Cutting and pressing tools
Cavity moulds
Measuring tools
Stamping tools
Deep drawing tools and presses
Industrial shears
Finishing
Hot rolled
Forged
Heat treatment
All standard heat treatment condition are available.
Such as Annealing, Quenching and Tempering, Normalizing and so on.
Standard grades
Werkstoff-NO. | DIN-EN | DIN-Abbreviation | SAE/AISI |
1.1545 | 10096 | C 105 W1 | W110 |
1.1730 | 10096 | C 45 W | -- |
1.2063 | 10096 | 145Cr6 | - |
1.2067 | 10096 | 100Cr6 | L1/L3 |
1.2080 | 10096 | X210Cr12 | D3 |
1.2101 | 10096 | 62SiMnCr4 | - |
1.2210 | 10096 | 115CrV3 | L2 |
1.2363 | 10096 | X100CrMoV5 1 | A2 |
1.2379 | 10096 | X155CrVMo12 | D2 |
1.2419 | 10096 | 105WCr6 | - |
1.2436 | 10096 | X210CrW12 | D6 |
1.2510 | 10096 | 100MnCrW4 | O1 |
1.2542 | 10096 | 45 WCrV7 | S1 |
1.2550 | 10096 | 60WCrV7 | S1 |
1.2601 | 10096 | X165CrMoV 12 | - |
1.2721 | 10096 | 50 NiCr13 | - |
1.2826 | 10096 | 60MnSiCr4 | - |
1.2842 | 10096 | 90MnCrV8 | O2 |
Profiles
Hot rolled section: round bar, square bar, flat bar
Forged section: round ,square, flats/blocks
Plates
Other grades and profiles on request.
Condition finished goods
hot forged/hot rolled + annealed/normalized + tempered/quenched + tempered/any conditions based on your requirements.
Chemical Elements: | |||||||||||
Grade | C | Si | Mn | P≤ | S≤ | Cr | Mo | V | W | OTHER | |
1.2344/SKD61/H13 | 0.35-0.42 | 0.80-1.20 | 0.25-0.50 | 0.03 | 0.02 | 4.80-5.50 | 1.00-1.50 | 0.80-1.15 | Cu≤0.25 Ni≤0.25 | ||
4Cr5MoSiV1 | 0.32-0.42 | 0.80-1.20 | 0.20-0.50 | 0.030 | 0.030 | 4.75-5.50 | 1.10-1.75 | 0.80-1.20 | |||
1.2379/D2/SKD11 | 1.50-1.60 | 0.10-0.40 | 0.15-0.45 | 0.030 | 0.030 | 11.0-12.0 | 0.60-0.80 | 0.90-1.10 | |||
1.2510/O1/SKS3 | 0.85-1.0 | 0.10-0.50 | 1.0-1.40 | 0.030 | 0.030 | 4.75-5.50 | ≤0.30 | 0.4-0.6 | |||
1.2363/A2/SKD12 | 0.95-1.05 | 0.10-0.50 | 0.40-1.00 | 0.030 | 0.030 | 4.75-5.50 | 0.90-1040 | 0.15-0.50 | |||
4140 | 0.38-0.43 | 0.15-0.35 | 0.75-1.00 | 0.035 | 0.040 | 0.80-1.10 | 0.15-0.25 | ||||
4340 | 0.38-0.43 | 0.15-0.35 | 0.60-0.80 | 0.035 | 0.040 | 0.70-0.90 | 0.20-0.30 | Ni 1.65-2.00 | |||
P20/1.2330/M202 | 0.28-0.40 | 0.20-0.80 | 0.60-1.00 | 0.030 | 0.030 | 1.40-2.00 | 0.30-0.55 | ||||
Surface conditions
scaled (black surface)/rough turned/milled/based on your requirements.
Size conditions:
1.Forged round bars: (Diameter) 14mm ~ 500mm ,Length:2000mm-6000mm
2.Forged plates: (Thickness)15~400mm x (Width)50~1500mm ,Length:2000mm-6000mm
3.Square bars: As customers’ requirements.
Melting process
EF, EF+LF+VD+ESR, EF+LF+VD+ESR+VIDP(vacuum, induction, degassing and pouring).
Application
1.Automotive:Automotive trim and molding/Difficult-to-form exhaust-system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-system components, catalytic converter shells, clamps
2. Construction: Gutters and downspouts, roofing, siding
3. Kitchenware: Cooking utensils, dishwashers, ovens, range hoods, refrigerators, skewers
4. Chemical processing: Oil refinery equipment, oil burner and heater parts
5. Appliances: Hot water tanks, residential furnaces
6. Power generation: Heat Exchanger tubing;
7. Farming: Dry fertilizer spreaders/Farm animal pens
Company Information
China National Building Materials Group Corporation (CNBM) was established in 1984 with approval of the State Council, and then became a Central Enterprise under direct supervision of State-owned Assets Supervision and Administration Commission of the State Council in 2003. It is in charge of the administrative affairs in China building materials industry. By the end of 2013, CNBM’s total assets exceeded RMB 360 billion, with over 130,000 employees, and 20 companies under direct management with 100% share control or majority control, among which 6 were listed companies, including 2 oversea listed. On July 7th, 2014, CNBM with revenue USD 41028 million, was ranked 267th on the ”World Top 500 Enterprises” by Fortune Magazine.
CNBM International Corp., established in 2004, is the business entity for trade and logistics of CNBM GROUP. It is in charge of the export of finished products as well as import of raw materials for its sister companies under the group. By the end of 2014, we have more than 30 business departments for different products and over 10 oversea offices for sales and customer service. CNBM –quality bar and special steel products regard quality as the essential factor leading to successful business. All the products are produced under the quality management system and tested by CNBM. Through years of effort, CNBM-quality bar and special steel products have built up great reputation in quality and service among customers all over the world.
Our Services
1.Reply your enquiry in 24 working hours,any time you can contact me
2.OEM,buyer design, buyer label services provided
3.Exclusive and unique solution can be provide to our customer by our well trained and professional engineers and staffs
4.we can provide free sample for your check
5.we have the certification of ISO9001
6.Special discount and protection of sales area provided to our distributor
7.Timely delivery
8.Good after-sale service
FAQ
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons.
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union,etc
A
