GM D-201H Double Sided Tissue Tape

Product Description:

CONSTRUCTION:

Tissue: 14gsm

Adhesive: Solvent based acrylic copolymer.

Liner: Silicone release PE-coated paper, white color.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + tissue): 120 micron

Rolling Tack (11mm steel ball): 10 cm

Peel Adhesion: Unwind Side -- 20 N/25mm (20 min dwell on stainless steel)

             Liner Side -- 17 N/25mm (20 min dwell on stainless steel)

Adhesion to liner: 0.5 N/25mm

Application Temperature: +10 ~ +40 Celsius degrees

Temperature Resistance: -10 ~ + 80 Celsius degrees

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.04 x 1000m; 1.04 x 500m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.