Chemical Pumps IH Series

Product Description:

Introduction
The IH type pump is chemical cantilever centrifugal pump, used for transporting corrosive medium or the medium which are not permitted to contaminate, and the liquid temperature is within -20°C-105°C. It can deliver much higher temperature medium by cooling unit. It is a saving energy product ,replaced type F anti-corrosive centrifugal pump.

Feature

1. IH model sulfuric acid pumps are the series of products designed according to ISO international standards. It is mainly composed of pump body, impellers, seal rings, impeller nuts, pump cover, seal parts, intermediate support, spindle, suspended parts and so on.

2. To make it convenient to disassemble, the prolonged coupling is designed, so that it is unnecessary to disassemble the Coupled input & output pipes during check and maintenance, only by disassembling the intermediate coupler of the prolonged coupling, users are able to screw out rotor part.

3. The shaft seal is mechanical seal generally, use of imported titanium rings and carbide mechanical seals and high temperature materials, corrosion resistant, no leakage.

4. The pump is connected with the motor through flexible coupling, the pump rotation direction, from the motor end, is clockwise rotation.

Application

Widely applied to chemical industry, petroleum, desalination of seawater, metallurgy, paper mill, foodstuff, pharmaceutical  factory and synthetic fiber etc.

Type and definition

IH 50 32-160-A-S1-303
IH-chemical centrifugal pump
50-pump intake diameter(mm)
32-pump diameter of discharge opening(mm)
160-impeller nominal diameter(mm)
A- impeller after the first cutting
S1-pump sealing mode S1 refers to single end surface inside mechanical seal
303-material code for contacting parts