Suspended Ceiling Grid Kit - Ceiling T Bar/Ceiling Grid System with Commercial Price

Product Description:

Specifications:

Material: High quality hot-dipped galvanized steel coil.

1) Flat Ceiling T-Grid

Model no.38#  32# 
Size:
height:32mm 38mm
Thickness:0.3mm 0.27mm
Wideth:24mm 22mm
Length:3600mm 1200mm 600mm and so on.
Raw materials:high-quality hot-dipped galvanized steel coil
The length and thickness can be produced on customer's requirment.

2.)Middle Groove Line T- Grid

Model no. 38#  32# 
Size:
height:32mm 38mm
Thickness:0.3mm 0.27mm
Wideth:24mm 22mm
Length:3600mm 1200mm 600mm and so on.
Raw materials:high-quality hot-dipped galvanized steel coil
The length and thickness can be produced on customer's requirment.

3.)Groove T-Grid
Model No.:32#
Size:
Height:32mm
Wideth:24mm 22mm 
Thickness:0.27mm 0.3mm
Wideth:24mm
The length:3600mm 1200mm 600mm and so on

Feature  of the ceiling tee grid (T-Bar, T-grid)

1.)    Be made of hot dip galvanized steel .it is fire tightness , flame retarded,soundproof,anti-aging

2.)    The connector by unique design,when you construct the ceiling, it is easy to install and not to be losened or to be detached each part..

3.)    It is also can be removed and reused without being damaged or without the use of tools.

4.)    Its suspension holes punched on the main tee and cross tee in order to increase the durability and safety of the lay-in grid suspended ceiling system.

Installation steps:

1.)    Determine the requirment ceiling level,mark the position and fix wall angle on the wall.

2.)    Hang main tee with T-bar suspension hook.

3.)    Insert cross tee to the main tee.

4.)    Cross tee adjacent to wall angle light fittings

5.)    Adjust the levels and alignments throughout the entire grid system accurately

6.)    Install PVC gypsum ceiling tile or othermaterials ceiling panel.

Description:

1.Superposition joint part between main carrier and vice carrier or vice carrier and carrier is called point lap.

2.It uses lap structure to assembly, connection between joints dovetail very well. The joint face unknits and have a nice appearance.

3.There is a barb at the vice carrier joint, it can avoid loosing and falling from the infection of outside force.

4.Soleplate of main and vice carrier is zincification armor plate, which meets the national GB standard demand. We use baked paint zincifcation armor plate as baked paint panel,whoes capacity of zincification is high. It meet the national GB standard demand.

5. Raw Meterial is galvanized steel with 80-100g/sqm

FAQ

1.Sample: small sample can be offered by free

2.OEM: OEM is accepted

3.MOQ: small order is ok

4.Test: any third party is accepted to test

5.Factory: Can visit factory any time

6.Delivery Time: small order is within 7days or according to your order