Loading Port:Tianjin
Payment Terms:TT OR LC
Min Order Qty:500 set
Supply Capability:5000 set/month
1.Manual Wafer Butterfly Valve Description：
A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk.The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
2.Main Features of the Manual Wafer Butterfly Valve
1)Small in size and light in weight and maintaince. It can be mounted whereever needed.
2)Simple, compact structure, quick 90 degree on-off operation.
3)Disc has two-way bearing, perfect seal, without leakage under the pressure test.
4)Flow curve tending to straight-line. Excellent regulation performance.
5)Various kinds of materials, applicable to different medium.
6)Strong wash and brush resistance and can fit to bad working condition.
3. Manual Wafer Butterfly Valve Images：
4.Manual Wafer Butterfly Valve Specification：
Size | DN40-DN1200 |
End flange | ANSI B 16.1, EN 1092, AS 2129 |
Face to face | ANSI B 16.10; EN 558-1 Series 20 |
Top flange | ISO 5211 |
Normal Pressure | DN40-DN600 PN1.0/1.6MPa (150/200PSI) DN700-DN1200 PN1.0MPa (150PSI)
|
Body | CI/DI/WCB/ALB/CF8/CF8M
|
Disc | DI/ALB/Rubber lined Disc/ 1.2501/CF8M/1.4529/CF8/Hastelloy Alloy/Monel |
Stem: | 416/304/316/431/17-4PH |
Seat | NR/Hypalon/EPDM/Neoprene/NBR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White NBR/White EPDM/EPDM (NSF)/PTFE |
5.FAQ
1. How about the Installation of the Wafer Style Butterfly Valve?Butterfly valves are installed by inserting the valve between two flanges using bolts or studs and nuts to hold it all together. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve. That benefit is received using the lug style valve.
2. What is the working principle of manual wafer butterfly valve?
A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
