Loading Port:China Main Port
Payment Terms:TT OR LC
Min Order Qty:-
Supply Capability:-
In 2007, Corporation together with Beijing Petroleum University developed a new type of Burner (H-116) at the bottom of Cracking Heater which had been applied on the old Ethylene Cracking Unit in Maoming City successfully.
Ethylene Cracking Heater belongs to Chemical Reaction Heater, fluid will be cracked by catalyst in tubes directly. The cracking of high molecular compound needs high temperature, so, the firebox temperature of Ethylene Cracking Heater is usually more than 1150℃ and tubes shall be heated uniformly. Lots of Burners shall be arranged at the bottom and side walls to meet above requirements. Burners at the bottom often use gas or combination of oil & gas as fuel to provide the 70% of heat productivity. Burners at side walls shall be Flameless Burners and the flame is attached to Walls in round shape.
In 2007, Corporation together with Beijing Petroleum University developed a new type of Burner (H-116) at the bottom of Cracking Heater which had been applied on the old Ethylene Cracking Unit in Maoming City successfully.
New types of Burners for Delayed Coking Fired Heater of Coking Unit are designed and manufactured independently by Corporation. They are suitable for Horizontal Tubular Heaters with higher viscosity, lower pressure drop and uniform heating such as Delayed Coking Fired Heater, Viscosity Breaking Heater, and Asphalt Fired Heater etc. Burners of this type have the characteristics of low power, short but strong flame, using classified fuel and high strength of flue gas backflow to effectively reduce the temperature at flame high-temperature area and the generation amount of thermodynamics NOX. Burners of this type can be used under the condition of natural draft of about 70Pa floor negative pressure or forced draft of about 250Pa.
GROUP mainly produces the following products:
l Refinery/chemical furnaces, incinerators, coal (liquid) chemical reformers
l Waste heat boilers, thermal medium boilers
l Class A1 /A2 pressure vessels
l Reactors, Heat Exchangers & Towers
l Oil tanks/accessories/mixers, alloy steel precision castings
l Four classes of piping supports and hangers used in fired-electric/thermo-electric/nuclear electric power industries and dampers
l Flue gas/air/coal powder duct and its attachments
Boiler ancillaries, water treatment devices and so on
