Building Hoist SC200/200 with 50m Height

Product Description:

Updated CMAX building hoist configuration

Good news that CMAX hoist technology makes great progresses in the last period, which have received warm welcome by the end-users and it is updated CMAX configuration hoist. In order to specially support our long-term potential partners

Following advantage for you kind review.

1.    Hoist complete cabin and enclosure frame adopt hot dip galvanized process to provide high level rust protection and corrosion protection.

(Note: process of acid pickling before hot galvanizing)

Before, only the building hoist mast sections are adopted as hot galvanized procession; Updated configuration, not only the mast section, but also the complete cabin and enclosure frame are adopted as hot galvanized procession.

Main advantage: improve the outlook and enlarge the complete steel structures usage life by 5~10% increase.

2.    Cabin exit door adopts ramping type

Main advantage: the ramping door likes a bridge between the building hoist and construction building, which normally increases around USD800 for this improvement.

3.    Large anchorage frame is supplied.

Main advantage: the updated configuration increase the tie-in adjustable distance from 1800~2100mm to 2900~3600mm, which normally increases around USD200/piece for this improvement.

4.    The side cage produced with aluminum board with increased thickness to 3MM.

Main advantage: normally it is 2mm, updated CMAX configuration make the side wall thickness as 3mm to enhance the strengthens and wear resistance of the cabin side wall, moreover, plywood with 6mm thickness and 500mm height is add to the inside wall of the cabin to prevent the damage of the cabin side wall.

5.    The floor is produced from 3MM thickness steel riffled board（Hot dip galvanized）, and 15MM thickness wooden board which can reduce the vibration and deformation a lot.

Main advantage: normally there is steel board only, updated CMAX configuration adds one wooden board under the steel board that decrease the noise by at least 50% compared before.

6.    Integrated electric control box

Main advantage: normally the electric box is big and the cable has to go into the electric box for connection purpose; the updated configuration makes the electric box size decrease by 10%.

7. For the main mechanic parts, bending plate structure (steel material: Q345B) is adopted, instead of angle steel or channel steel in order to improve the main steel structure’s intensity and the nice appearance.

( Note: process of steel board bending)

Main advantage: instead of angle or channel steel for main mechanic structure, bending plate steel structure not only makes the steel structure intensity increases by around 20%, but also makes the whole appearance more attractive after painting. 

Thanks for choosing CMAX updated configuration building hoist. It is believed that your esteemed company will be more competitive with our qualified products and after-service.