Loading Port:China main port
Payment Terms:TT OR LC
Min Order Qty:50 set
Supply Capability:1000 set/month
1.Structure of Gate Valve Description：
The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.
2. Main Features of the Gate Valve：
• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber
• Free of water pollution
• High manufacturing accuracy
• High strength
• Environmental protection and energy saving
• Good visual effect
3. Images
4.SPECIFICATION
NO. | Part Name | CS to ASTM | AS to ASTM | SS to ASTM | |
Type A105 | Type F22 | Type F304(L) | Type F316(L) | ||
1 | Body | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
2 | Seat Ring | A276 420 | A276 304 | A276 304(L) | A276 316(L) |
3 | Wedge | A276 410 & 430 | A182 F304 | A182 F304(L) | A182 F316(L) |
4 | Stem | A182 F6 | A182 F304 | A182 F304(L) | A182 F316(L) |
5 | Gasket | Corrugated SS + graphite | SS + PTFE | ||
6 | Bonnet | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
7 | Bonnet Bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
8 | Pin | A276 420 | A276 304 | ||
9 | Gland | A276 410 | A182 F304(L) | A182 F316(L) | |
10 | Gland Eyebolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
11 | Gland Flange | A105 | A182 F11 | A182 F304(L) | A182 F316(L) |
12 | Gland Nut | A193 2H | A194 4 | A194 8 | A194 8M |
13 | Yoke Nut | A276 410 | |||
14 | H.W.Lock Nut | A194 2H | A194 4 | A194 8 | A194 8M |
15 | Nameplate | SS | |||
16 | Handwheel | A197 | |||
17 | Bearing Gasket | A473 431 | |||
18 | Stem Packing | Flexible Graphite | PTFE | ||
Suitable Medium | W.O.G.etc | W.O.G.etc | HNO3CH3OOH etc | ||
5.FAQ
1. What's are the characteristics of gate valve?
The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel.
2. What is the work principle of gate valve ？
The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.
3. What is the structure?
Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.
