Loading Port:Shanghai
Payment Terms:TT or LC
Min Order Qty:5 m.t.
Supply Capability:9000 m.t./month
1.Product description:
Aluminium Alloy | Thickness | Width | Length | Temper |
| (mm) | (mm) | (mm) or coils | ||
| A1050,A1060,A1070,A1100,A1200 | 1.0-10.0 | 100~2000 | 100~8000 | O,H12,H14,H16,H18,H22,H24,H26,etc |
| A3003,A3105,A3004 | 1.0-10.0 | 100~2000 | 100-8000 | O,H12,H14,H16,H18,H22,H24,H26,etc |
| A5052 ,A5005,A5083,A5754 | 1.0-10.0 | 100~2000 | 100-8000 | O,H18,H14,H32,H34,H111,H112 ,etc |
| A8011 | 1.0-10.0 | 100~2000 | 100-8000 | O,H12,H14,H16,H18,H22,H24,H26,etc |
| Packing : Export seaworthy wooden pallet ,and each pallet about 2 tons | ||||
| Standards:ASTM-B209. EN573-1 | ||||
| Quality of material: free from defects like oil stain , roll marks, waves ,dents, scratches etc,A+ quality | ||||
| Application :anti-slipping ,decoration ,Floor ,Stair Steps ,etc | ||||
| MOQ | 2 tons | |||
| Payment term: | T/T,L/C | |||
| Delivery Time | within 25 days after receipt the deposit or lc | |||
| Kind attention : Specifications can be produced as the client requirements. | ||||
| Bar pattern :one bar ,two bar ,three bar ,five bar ,diamond etc | ||||
| Finish ; normal mill finsh ,bright finish . | ||||
2.Chemical Composition :
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | ||
| Single | Total | |||||||||||
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | V:0.05 | 0.03 | 0.03 | _ | 99.6 |
| 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | V:0.05 | 0.03 | 0.03 | 99.7 | ||
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | 99 | |
| 1200 | Si+Fe:1.00 | 0.05 | 0.05 | _ | 0.1 | _ | 0.05 | 0.05 | 0.15 | 99 | ||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | 0.1 | _ | _ | 0.05 | 0.15 | Remainder |
| 3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8~1.3 | _ | 0.25 | _ | _ | 0.05 | 0.15 | Remainder |
| 3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.20~0.6 | 0.1 | 0.25 | _ | 0.1 | 0.05 | 0.15 | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | 0.4 | _ | 0.1 | 0.05 | 0.15 | Remainder |
| 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.50~1.1 | 0.1 | 0.25 | _ | _ | 0.05 | 0.15 | Remainder |
| 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | _ | _ | 0.05 | 0.15 | Remainder |
| 5083 | 0.4 | 0.4 | 0.1 | 0.40~1.0 | 4.0~4.9 | 0.05~0.25 | 0.25 | _ | 0.15 | 0.05 | 0.15 | Remainder |
| 5086 | 0.4 | 0.5 | 0.1 | 0.20~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | _ | 0.15 | 0.05 | 0.15 | Remainder |
| 6061 | 0.4~0.8 | 0.7 | 0.15~0.40 | 0.15 | 0.80~1.20 | 0.04~0.35 | 0.25 | _ | 0.15 | 0.05 | 0.15 | Remainder |
| 6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.90 | 0.1 | 0.1 | _ | 0.1 | 0.05 | 0.15 | Remainder |
| 6082 | 0.7~1.3 | 0.5 | 0.1 | 0.4~1.0 | 0.6~1.2 | 0.25 | 0.2 | _ | 0.1 | 0.05 | 0.15 | Remainder |
| 8011 | 0.5~0.9 | 0.6~1.0 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | _ | 0.08 | 0.05 | 0.15 | Remainder |
