Aluminum Type MC Branch, feeder and service power distribution under high ambient

Product Description:

APPLICATIONS suitable for use as follows:

• Branch, feeder and service power distribution under high ambient temperatures in commercial, industrial, institutional, and multi-residential buildings

• Power, lighting, control, and signal circuits

• Fished or embedded in plaster

• Concealed or exposed installations

• Environmental air-handling spaces per NEC^©300.22(c)

• Places of Assembly per NEC®518.4 and theaters per NEC®520.5

• As aerial cable on a messenger

• Installation in cable tray and approved raceways

• Under raised floors for information technology equipement conductors and cables per NEC®645.5(D)&645.(D)(2)

• Class ⅠDiv.2, Class ⅡDiv.2,Class Ⅲ Div.1 Hazardous Locations

Joysense Aluminum Type MC Cable with tripele e® Aluminum Alloy Meets or exceeds the requirements of UL Standard 44,UL Standard 1569 for Type MC, ICEA S-95-658(NEMAWC70)for O-2000 V Nonshielded Cables, Federal Specification A-A59544(formerly J-C-30B),IEEE 1202(70,000BTU/hr) Vertical Cable Tray Flame Test, and the American Electrical CODE®. Joysense Aluminum Type MC Cable with triple e® Aluminum Alloy is listed for use in UL 1,2,and 3 Hour Through –Penetration Firestop Systems.

Joy Sense Aluminum Type MC Cable is constructed with Type XHHW-2 conductors rated 90℃ wet or dry, and a bare equipment grounding conductor. The Conductors are AA-8000 series Aluminum Alloy compact stranded. A binder tape is wrapped over the conductors with interlocked aluminum tape applied over the assembly. Aluminum interlocking armor is applied over the assembly. Refer to color chart for conductor color sequence.

• UL Classified 1,2,and 3 Hour Through-Penetration Firestop Systems:W-J-3037,W-L-3110,W-L-3113,W-L-3117,W-L-3120,W-L-3121,W-L-3160,C-AJ-3115,C-AJ-3140,C-AJ-3142,C-AJ-3145,C-AJ-3173,C-AJ-3202,C-AJ-4065,C-AJ-4066,F-C-3038

• Cable reverse wound on reel for ease of pulling and installation.When pulling from coils,pull from inside to ensure ease of installation

• Anti-short bushings are not required for use with MC cable per the NEC® and UL