Aluminum Profile Extrusion Handling Table with Competitive Price

Product Description:

This equipment uses high rigidity alloy steel rollers, match with convey device, the aluminum sheet will be more flat after correction.
Five-group type: upside two rollers, underside three rollers
Seven-group type: upside three rollers, underside four rollers
The width of aluminum sheet≤2000mm
The thickness of aluminum sheet≤80mm

Other Popular Products

1.Aluminum Profile Extrusion Handling Table

Aluminum profile handling table is designed for the primary treatment after profile extruded, including the profiles' cooling, conveying, pulling, straightening, gauging and cutting. This equipment mostly for 500T-1800T aluminum extrusion press, adopt heat resistant felt belt and felt roller to convey, it can effectively avoid the profiles' secondary scraped and distorted, improve the product pass rate.

The handling system including as below items:

1). Water quenching tank & lead out table;

2).The whole handling table(from run out table to saw transfer table);

3).Stretcher and finish saw with auto/manual length gauge table.

2.Aluminum Extrusion Handling Machine 

Aluminum Extrusion Handling Machine  do the profile's pulling, conveying, cooling, straightening, gauging and cutting. This equipment is for 1100T aluminum extrusion press, adopting heat resistant felt belt and felt roller to convey, it can effectively avoid the profile's sencondary scraped and distorted, improve the product pass rate 

3.1100T Aluminum Profile Puller

Pulling force:150KG

1.The rail is made of 32 # I steel, both sides with 40 # square steel, steels through related treatment  in order to meet the necessary rigidity and reducing the profiles defects which caused by the vibration of puller ;

2.The puller is driven by DC motor, working through the chain which are set on the rail of the clamp device , electromagnetic brake control is adopt on the return;

3.The pullers head jaws clamp the sections and maintain certain degree of tension with the profiles, the pulling speed is synchronously with the extrusion press unit;

4.The electrical system is controlled by inverter, Mitsubishi PLC , through the encoder and PLC control the pulling speed and display the pulling length, it can position accuracy and high degree of automation;