Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:100 set
Supply Capability:10000000 set/month
PART1:Introduction:
Aluminum Frame for PV Modules
Certificate: 2008 quality management system certification
Material: Aluminum alloy 6063 T5
Surface treatment: electrophoresis, powder coating, PVDF and more
PART2: Special features:
1.High Quality, strictly quality inspection during production and whole inspection before package.
2.Hundreds of Standard Designs can be available and supplied.
3.Good performance, product Warranty for 25 years.
4.Deep processing: fine saw cutting, drill, broaching, punching, polishing, sand blasting
5. Pure 99.7% aluminum materials without any scrap used;
6.Reliable quality & Strictly quality control process assured higher quality.
PART 3: Technical Characteristics
ALUMINIUM FRAME | ||||||||
Dimention: length:1664±0.2mm, width:997±0.2mm, Thickness:45mm | ||||||||
trademark | Chemical Composition | |||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | ||
6063 | 0.20~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.9 | 0.1 |
| |
Zn | Ti | Zr | Other | Al | ||||
0.1 | 0.1 |
| Single | Total | Margin | |||
0.05 | 0.15 | |||||||
Pakcing: | In boxes | |||||||
Alloy | Supply status | Thinkness/mm | Tensile strength(Rm)N/mm² | Elongation are break(Rp0.2)N/mm | Elongation(A50mm)% | Test thickness(mm) |
| |
|
|
| No less than | |||||
6063 | T5 | All | 160 | 110 | 8 | 0.8 | ||
