Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:5 m.t.
Supply Capability:9000 m.t./month
High Quality HAVC Solvent Insulation Self Adhesive Repair Roofing Aluminum Foil Tape
Description
Aluminium tape is suitable for repairs on metallic surfaces such as car body work,
roof and gutter repairs and even insulating pipes. Suitable for applications indoors and outdoors,
it provides a general purpose temperature insulation and is also suitable for sealing of ducts, masking, protecting, repairing and closing.
Technical Specification:
• Aluminum backing provides excellent reflection of both heat and light.
• High quality adhesive with strong adhesion and holding power offers permanent sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application.
• Good aging resistance both indoors and outdoors.
• Low moisture vapor transmission rate offers excellent sealing and patching performance
TYPICAL PHYSICAL PROPERTIES
PROPERTIES | METRIC | ENGLISH | TEST METHOD |
Backing Thickness | 50 Micron | 2.0 Mil | PSTC-133 / ASTM D 3652 |
Total Thickness | 90 Micron | 3.6 Mil | PSTC-133 / ASTM D 3652 |
Adhesion to Steel | 20 N/25mm | 72 Oz./In. | PSTC-101 / ASTM D 3330 |
Tack Rolling Ball | 15 cm | 6.0 In. | PSTC-6 / ASTM D 3121 |
Tensile Strength | 75 N/25mm | 17.0 Lb/In | PSTC-131 / ASTM D 3759 |
Elongation % | 3.5 | 3.5 | PSTC-131 / ASTM D 3759 |
Service Temperature | -30 ~ +120 °C | -22 ~ +248 °F | ------------ |
Applying Temperature | +10 ~ 40 °C | +50 ~ +105 °F | ------------ |
TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.
Aluminium tape FORM & SIZE AVAILABLE
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1000m / 1200m
STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 ~ +40°C (+50 ~ +105 °F).
