3d Fabric Design Wallpaper for Wall Decoration Wallpaper

Product Description:

3d Fabric Design Wallpaper for Wall Decoration Wallpaper

Product Description：

Advantages: 

1) With environment protection coating which can quick dry after printing and have perfect printing effect.

2) Flexible and variable color, pattern, picture as any of your personality style designed and made on demand.

3) Fine texture delivers high quality images, Vibrant color after digital printing process.

4) Ink dries immediately with correct ink settings optimized according to ink, printer and software instructions, rip and profile.

5) Suitable for most large format inkjet printers.

FAQ:

Q: What is the Wallpaper roll size?

A: the roll size is 0.53mx10m.

Q: How to install the wallpaper? 

A:  Spackle and sandpaper the wall to smooth any imperfections, then apply a coat of wallpaper primer. While it dries, cover a long worktable or just the floor, with a clean plastic painter's tarp. Make sure your hands are clean.

If you're papering a whole wall, cut vertical strips 4 inches longer than the wall height; once the paper is up, you'll trim the excess. Arrange wallpaper strips side by side on the floor to ensure that the pattern lines up correctly, gently taping them together with painter's tape to temporarily secure them. If you're making a shape (as with the headboard or sconce backing plates), cut it out on a cutting mat with a utility knife.

Use a tape measure and a pencil to mark where on the wall the paper will be placed. For example, mark the top edge of a chair rail or sides of a rectangle.

Pour premixed clear wallpaper glue into a paint roller tray. Use a small paint roller to apply it quickly and evenly to the back of the paper. (Some wallpaper comes prepasted, so you can just dampen it according to the manufacturer's instructions.)

Now apply the paper one strip at a time, smoothing each onto the wall from the center outward using an 8-inch plastic smoother. For long strips, use a stepladder and work from the top down; have someone hold the other end as you position it (use this same method for wide chair-rail strips). The seams of side-by-side strips should butt against one another, not overlap; make sure these seams lie flat by using a seam-roller.

Once a piece is up, you have about 10 to 15 minutes to perfect its placement. Carefully push any bubbles out toward the borders.

Wash off excess glue with a damp natural sponge, continuing to smooth the3D washroom PVC Wallpaper.

Q: What’s the delivery time ?

A: 3-5 days for 1-600 rolls, 10-15 days for container.

Q: What’s the payment terms ?

A:  TT

Q: How do you make replacement with quality problems ?

A: New replacement will be packed into your next order or send to you directly after receive video or photo about quality problems.