10KVA UPS Price with High Quality

Power(VA/Watt)

6000VA/4200W

10000VA/7000W

10000VA/7000W

15000VA/10500W

20000VA/14000W

INPUT

Voltage & VoltageRange

220 VAC, 1 Phase + Neutral

220 VAC, 1 Phase + Neutral

380 VAC, 3 Phase + Neutral

380 VAC, 3 Phase + Neutral

380 VAC, 3 Phase + Neutral

Voltage Tolerance

176 – 276 VAC ± 3%

176 – 276 VAC ± 3%

304 – 478 VAC ± 3%

304 – 478 VAC ± 3%

304 – 478 VAC ± 3%

Power Factor

≥ 0.98

≥ 0.98

≥ 0.95

≥ 0.95

≥ 0.95

Current (nominal)

23 Ampere

37 Ampere

13 Ampere / Phase - 39 A

23 Ampere / Phase - 69 A

30.3 Ampere / Phase - 91 A

Input Fuse

32 A NFB

50 A NFB

63 A NFB

100 A NFB

100 A NFB

Frequency & FrequencyRange

50 Hz, 46 ~ 54 Hz

Working with Gen Set

Perfect Voltage and frequency Compatibility

OUTPUT - INVERTER and BYPASS

LoadPower Factor Range

0.65 inductive - 1.0 resistive

Voltage Wave Form

Sinusoidal

Voltage & Voltage Tolerance

220 / 230 / 240 VAC ± 1%

Dynamic Response

At 50% - 100 - 50% unbalanced load, max voltage decline < ± 5%

Recovery Time

At Dynamic load Changes, Output Voltage recovery time is 60 msec ± 1%

Total Harmonic Distortion

For Linear Load ≤ 2%, Non Linear Load ≤ 6%

Frequency & FrequencyRange

50 Hz / Mains 46-54 Hz, Battery Mode ± 0.1% (0.05 Hz)

Crest Factor

3:1

Over Load (Mains)

For 105% - 130% load 10 mins., for > 130% load transfer to bypass after 1 sec, shutdown after 1 min at overloaded bypass

Over Load (Battery)

At > 105% load shut down after 10 sec.

Bypass and Transfer Time

Standard static bypass, Completely Uninterrupted transfer between Mains - Battery / Battery - Mains

Bypass Voltage Tolerance

176 – 261 VAC, 1 Phase + Neutral

BATTERY

Type and Placement

Maintenance Free, Dry Type

Nominal Battery Voltage

240 VDC

Type

LCD Panel

Control Panel

Push Buttons (Open / Close, Audible Alarm Cancellation)

Measuring and Alarms

% Load, Input Voltage Exist, Output Voltage Exist, Bypass Active, Battery Mode, Battery Capacity (%), Inverter in Service, Fault

Indicators (LED)

Mains On, Mains Reverse, Battery Mode, Bypass On, Load / Battery Level, Overload, Fault

PROTECTIONS

Overload

Electronic Protection is available. In case of exceeding limits, the load is transferred to bypass without any interruption

Short Circuit

Inverter shuts down automatically

Over Temperature

If the internal Temperature is 90°C the load is transferred to bypass, When it returns < 80°C, Inverter starts to work

Modem / Network Protection

Modem / Network protection input against to Voltage Spikes

AUDIBLE ALARMS

Alarm Type and Alarms

Buzzer, it can be switched off by audible alarm button.

Battery Mode, Battery Low, UPS fault, Overload, Short Circuit, Over Charge, Charger, Bypass, Inverter fault, Communication fault

COMMUNICATION

Interface and Protocol

Standart DB 9 (Female) Port, Intelligent RS232 (standard), SNMP(optional) and DB25 parallel port (for paralelling, optional)

Software

Winpower-XP

GENERAL

Total Efficiency At 100% load

88%

Noise Level

≤ 55 dBA

≤ 60 dBA

Electro Magnetic Compatibility

EN 61000-4-2 (ESD), 4-3 (RS), 4-4 (EFT), 4-5 (surge), IEC 62040-2 (EMI)

Operation Temperature and Humidity

0 °C ~ 40 °C, maximum 20-90% (Non Condence)

Storage Temperature

-20 °C ~ +70 °C

Protection Class

IP20

Cooling Type

Forced cooling with variable speed fan according to load %

Operation Altitude

≤ 1000 meter (from the sea level), at nominal load

Dimensions (mm), W x H x D

260x717x570

Weight W/O / W/Battery (kg)

35 / 84

38 / 93

38.5

55

55