Loading Port:Qingdao
Payment Terms:TT OR LC
Min Order Qty:1 kg
Supply Capability:300 kg/month
1.Brand:CHINSC
2.Motor KW:160kw
3.MOQ:1 set
4.Good price&quality
1. Application
Textiles, Plastics, Ceramics, Electronics, Numerical Controls, Foods Processing, Light Industry, And Pharmaceuticals. Oil, mining and other fields.
2. Technical Specification
Item | Description | |
Input Power Supply | Rated voltage | standard:380v Nonstandard: 660v, 1140v, common DC bus ,DC power supply to customize. |
Number of phases and frequency | 3-phase 50/60Hz(refer to rated current specification) | |
Range | Voltage:-15%~20%,frequency:±5%Hz | |
Power Capacity | If Power capacity is more than ten times of the drive capacity, please purchase input reactor components. | |
Output Power Supply | Rated Capacity/Current | Please refer to table2-1 |
Over load ability | Type G: 150% rated current for 1 minute, 180% rated current for 1 second; Type P: 120% rated current for 1 minute, 150% rated current for 1 second. | |
Cooling | Cooling | Forced Cooling |
Temperature | 80°C trip | |
Fan control | Heatsink temperature> 50°C continuous operation | |
Main control functions | control mode | No sense of vector control, V/F control, Torque Control |
Output frequency range | 0.1-600 Hz | |
Frequency resolution | Keypad setting:0.01Hz; Analog setting: 0.1Hz | |
Frequency Accuracy | Keypad setting: highest output frequency ±0.01%; Analog setting: max output frequency ±0.2% | |
Frequency | 0.5-600Hz | |
Braking | 15KW and below, with a brake unit, 18.5KW above need to connect an external braking unit. | |
DC injection braking | Brake Voltage: 0~150% rated current adjustable, allowing the 0Hz~maxmin frequency braking, time :1~50seconds adjustable. | |
Acc/Dec time | 0.1~3600.0s | |
Low-frequency torque compensation | Manuel or automatic compensation | |
Distance | If the wiring distance is more than 50m between the drive and the motor wiring, please install output reactor components | |
Motor overheating detection | Trips and shows E016 | |
Standard functions | Speed tracking, paused reducer, PID control, automatic speed compensation, automatically adjusts voltage output (AVR), 16 segment speed operation, torque control, frequency hopping, torque limiting, automatic multi-stage operation, U(-)SPwn control, pendulum frequency operation, two signals superimposed control, automatic reset, timer. | |
Standard control signals | Analog input | Two groups of external analog inputs: 0~5V, 0 or 4~20mA. Two groups of analog inputs 0~1A. Keypad potentiometer input (0~5V). |
Analog output | Two programmable analog output (0~10V) or (0~20mA) | |
Digital input | Six groups of programmable open collector inputs | |
Digital output | One programmable open collector output, Two set of programmable relay outputs. | |
Communication Interface | Sequence communication | Sequence communication Options included, can be unified through multiple (up to 99 units) dynamic control. |
Communication protocol | Standard MODBUS | |
Communication port | RS485 | |
Display | Seven-Segment Display | Output current, output power, input power, power factor, the timer time, the heat sink temperature. |
Threshold of overload cumulative, the output power limit, the output frequency, speed conversion, DC bus voltage, output voltage and temperature. | ||
Protection |
Standard function | Over current, overload, short circuit protection, over voltage, Under voltage protection; Over heat protection; ground fault, input failure phase, output failure phase, the motor overheated. |
Environment | Ambient temperature | -10°C~+40°C(ambient temperature is within 40°C~50°C, deration is required),free from direct sunlight. |
Humidity | Less than 95%RH, without condensation | |
Application environment | Non-corrosive, flammable, explosive, dust absorbent material, all kinds of lint does not accumulate. | |
Vibration | Less than0.6G | |
Elevation | Lower than 1000m,if exceed this value, deration is required. | |
Storage temperature | -20~60°C |
3. Company Introduction
Certification