Loading Port:China main port
Payment Terms:TT OR LC
Min Order Qty:1 set
Supply Capability:100 set/month
Profile
With the approximate circle movement, the series of vibrating screen is a kind of multilayer, high-efficient and new-type vibrating screen. Considering that the screen has adopted the boxvibrate eccentric and tyre coupling, the screen can enhance the service life of equipment, meanwhile, the configured spring damping devices can effectively reduce the impact on the foundation, therefore, it has small vibration noise. As the configured device for all kinds of crusher machinery, the screen is mainly used for classifying the mine, coal, building materials, as well as other broken stones, quarrying and dinas. Due to the alternative multilayer screen cloth, it can satisfy the screening requirements of materials with different dimensions,
Vibrator:
The eccentric block is equipped on each side plate by means of transmission shaft connection. The vibrator is made up of self-aligning bearing and two shield covers. The eccentric block is mounted on the transmission shaft. By means of changing the angle between the main eccentric blocks and auxiliary eccentric block, it can change the size of the vibrator to get various amplitude.
Straining box: the straining box is the biggest part in YK circular vibrating screen, which is mainly made up of feeder trough, relief trough, side plate, cross girder, screen surface, tension device and other devices. The side plate is made of massive steel plate. The cross girder adopts seamless steel tube. Each soldering lug and side plate are connected with high-strength bolt. The working of the YK circular vibrating screen is reliable. And, the manufacturing and maintaining is simple.
Technical specifical
Model | Rotation speed(r/min) | Number of screening surface layers | Specification of screen deck(mm) | Max. Feeding quantity(mm) | Vibration frequency(r/min) | Tilt(°) | Double amplitude (mm) | Processin ability (t/h) | Physical dimension(mm) | Power(kw) | Weight (t) |
YK1545 | 1000 | 1 | 1500×4500 | 400 | 970 | 10 | 8 | 33-240 | 4805.5×2911×2076 | 11 | 3.9 |
2YK1545 | 1000 | 2 | 1500×4500 | 400 | 970 | 20 | 8 | 32-240 | 5155×3050×3220 | 15 | 4.4 |
2YK1548 | 730 | 2 | 1500×4800 | 200 | 730 | 20 | 8 | 60-270 | 5072×3147×3776 | 15 | 4.9 |
3YK1548 | 970 | 3 | 1500×4800 | 400 | 970 | 20 | 8 | 47-275 | 5011×3086×2653 | 15 | 6 |
4YK1548 | 730 | 4 | 1500×4800 | 200 | 970 | 20 | 8 | 60-250 | 4800×2947×4046 | 18.5 | 7 |
YK1854 | 1000 | 1 | 1800×5400 | 200 | 980 | 20 | 8 | 63-586 | 5400×3247×2750 | 18.5 | 5.1 |
2YK1854 | 970 | 2 | 1800×5400 | 400 | 970 | 20 | 8 | 63-586 | 5200×3400×3911 | 22 | 7.6 |
3YK1854 | 970 | 3 | 1800×5400 | 400 | 970 | 15 | 8 | 51-496 | 6500×3326×3393 | 22 | 8.7 |
4YK1854 | 730 | 4 | 1800×5400 | 400 | 730 | 20 | 8 | 32-310 | 5447×3417×4266 | 30 | 10.5 |
YK2160 | 730 | 4 | 2100×6000 | 400 | 730 | 20 | 8 | 400-600 | 6050×4035×3005 | 18.5 | 5.9 |
2YK2160 | 730 | 2 | 2100×6000 | 400 | 730 | 20 | 8 | 390-560 | 6050×3735×4087 | 30 | 7.8 |
3YK2160 | 740 | 3 | 2100×6000 | 400 | 730 | 20 | 8 | 390-560 | 6050×3934×4594 | 30 | 10.7 |
4YK2160 | 740 | 4 | 2100×6000 | 400 | 740 | 20 | 8 | 66-720 | 6050×3966×5073 | 45 | 11.1 |
YK2460 | 730 | 1 | 2400×6000 | 200 | 730 | 20 | 8 | 450-650 | 6050×4035×3005 | 22 | 6.2 |
2YK2460 | 730 | 2 | 2400×6000 | 200 | 730 | 20 | 8 | 450-650 | 6050×4035×4087 | 30 | 8 |
3YK2460 | 740 | 3 | 2400×6000 | 200 | 740 | 20 | 8 | 450-650 | 6050×4234×4594 | 37 | 10.7 |
4YK2460 | 740 | 4 | 2400×6000 | 200 | 740 | 20 | 8 | 450-650 | 6050×4266×5073 | 45 | 12.8 |
2YK2865 | 730 | 2 | 2800×6500 | 200 | 730 | 20 | 8 | 600-800 | 6500×4407×4618 | 2×22 | 11.4 |
3YK2865 | 740 | 3 | 2800×6500 | 200 | 730 | 20 | 8 | 600-800 | 6500×4407×4618 | 2×22 | 13 |
YK3072 | 740 | 1 | 3000×7200 | 200 | 740 | 20 | 8 | 600-800 | 6766×4607×3365 | 2×18.5 | 10.8 |
2YK3072 | 730 | 2 | 3000×7200 | 200 | 730 | 20 | 8 | 600-800 | 7200×4455×4379 | 2×22 | 11.8 |
3YK3072 | 730 | 3 | 3000×7200 | 200 | 730 | 20 | 8 | 600-800 | 7200×4467×4964 | 2×22 | 15.8 |
YA1848 | 1460 | 1 | 1800×4800 | 400 | 1460 | 20 | 8 | 60-270 | 4976×3023×3002 | 15 | 7 |
YZ1230 | 1500 | 1 | 1200×3000 | 200 | 1490 | 20 | 8 | 12-125 | 3153×2030.5×1611.4 | 5.5 | 1.7 |
3YZ1236 | 1500 | 3 | 1200×3600 | 200 | 1500 | 20 | 8 | 15-150 | 3990×2270.5×2776.3 | 11 | 4.3 |
Supporting device: The elastic component id made of rubber spring. By means of changing the height of back and front support, it can change the the leaning angle of screen. The changed height of support and the size of anchor bolt hole are decided by user.
Sketch
Storage
After the equipment arrives at the destination, the user must check whether if the components are complete in the light of the product list. In the meanwhile, the user must check whether if the product exists flaw and damage caused during the transportation and then record the damage and flaw on the bill of lading. The equipment must be put on flat and smooth ground. On the bottom of the screen, the sleeper must be underlaied for stable installation. When it is put on open yard, it can not touch the ground as well as it can not be soaked. When it is stored, the upper part should be covered for preventing it from erosion by wind and rain.
Installation
The installation of the screen must apply the requirement of general drawing on operational spot and the sequence of installation as following:
First of all, it must make foundation leveling. Then, it must install the supporting frame and motor frame and adjust the relative position. After it is fastened, it can install the damping spring in proper order. Before the damping spring is installed, the spring shall be selected according to the actual value of the end marks
Install the screen : firstly, it should transport the screen to the installation site. Lift the screen and make the inclination of the screen conforming to the general drawing and then put it down slowly. The screen must be put on the surface of the damping spring.
Install the electric motor and connect the line. The user must pay attention to the center height. If the screen is installed after it has been transported to the destination over a half year, all of the exciter should be dismounted. Then all of the exciter should be wash again and refuel again.
Install the flexible coupling between the vibration exciter and electric motor. It is considered that the axis of the electric motor and axis of vibration must be coaxial.
Running-in and acceptance inspection
The installation should be checked in accordance with narrated instruction. The screen can be operated through test run with empty load.
The time of test run will be no less than one hour with empty load. During the test run, the user should observe the screen continuously. The starting of the screen be smooth and quick. The vibration of the screen is stable without special noise.
Operating specification
The operator should be familiar with the equipment. And the operator must obey the stipulations on operation, maintenance, safety, sanitation and others in the plant.
Preparation: before the operation of the equipment, the operator must read the duty record and monitoring the equipment. All bolts should be checked to assure whether if it is loose and whether if the screen is in abrasion.
Starting: the starting of the screen must obey the sequence of process system one time.
Structure features
It has advanced structure, strong excitation force and large vibration intensity.
It has small initial vibration quantity.
It can pass through resonance steadily.
It has less screen clogging phenomenon.
Due to the small noise, it can improve the working environment,
It is easy to maintenance the study and durable property.
FAQ
What characteristic do the YK circular vibrating screen include?
The YK circular vibrating screen is convenient to install with simple structure. The max.grading layer can reach four.
What type do the sieve plate adopt?
It adopts general wearable mess grid made of manganese steel. Also it can adopt punching wearable steel plate which is depended on user.
How many vibrator sets do the YK circular vibration have?
The general specification adopts one set vibrator. The larger vibrator will adopt two sets in according to synchronous belt the same direction movement.